fitting scotoiler injector to pointy - SV650.org

steveg · 12-05-07, 03:09 PM

Hi have got a guide to fit ( thanks Cloggsy) , however this shows a dual injector
I'm going to fit a std single injector .

any one got a photo on how you can fit using paddock bobbin hole ?
Do you get needed bits in kit to fit to bobbin hole thingy !
Want to route tubing so that I can use my standard paddock stand
Don't want the injector to move !!

found this on the scotoiler site showing the rear axle bolt being used which looked good as tubing could be rooted ontop of swing arm

see 4th pict down on link http://www.scottoiler.com/support_guide3.asp

Cheers Steve

12-05-07, 04:00 PM

mines like the 1 in the piccy, you do get all the bits needed when you buy 1 unless you get a 2nd hand one like i did

steveg · 12-05-07, 04:04 PM

Thanks Hovis

How the f##k did you loose 8 stones , I lost 3 stone once and that was hard work !

Well done that man

Cheers Steve

13-05-07, 03:46 AM

is the universal kit the one you need for the sv?

Stu · 13-05-07, 10:07 AM

On the scottoiler site if you download the fitting instructions for a pointy SV it has a picture of an SV1000 swingarm with the dispenser attached to the swing arm bobbin.
Basically you need to have swingarm protectors fitted, then you place the scottoiler bracket behind the protector.
http://www.scottoiler.com/userfiles/...%20SV1000S.pdf

12-05-07, 03:09 PM	#1
steveg Member Join Date: Jan 2006 Location: The Midlands Posts: 892	fitting scotoiler injector to pointy Hi have got a guide to fit ( thanks Cloggsy) , however this shows a dual injector I'm going to fit a std single injector . any one got a photo on how you can fit using paddock bobbin hole ? Do you get needed bits in kit to fit to bobbin hole thingy ! Want to route tubing so that I can use my standard paddock stand Don't want the injector to move !! found this on the scotoiler site showing the rear axle bolt being used which looked good as tubing could be rooted ontop of swing arm see 4th pict down on link http://www.scottoiler.com/support_guide3.asp Cheers Steve __________________ ex - red sv650s 06 reg Now Triumph sprint 1050 ABS 05 Reg AKA Papa Smurf Last edited by steveg; 12-05-07 at 03:20 PM.

12-05-07, 04:00 PM	#2
hovis Guest Posts: n/a	Re: fitting scotoiler injector to point mines like the 1 in the piccy, you do get all the bits needed when you buy 1 unless you get a 2nd hand one like i did

12-05-07, 04:04 PM	#3
steveg Member Join Date: Jan 2006 Location: The Midlands Posts: 892	Re: fitting scotoiler injector to point Thanks Hovis How the f##k did you loose 8 stones , I lost 3 stone once and that was hard work ! Well done that man Cheers Steve __________________ ex - red sv650s 06 reg Now Triumph sprint 1050 ABS 05 Reg AKA Papa Smurf

13-05-07, 03:46 AM	#4
kcowgergmm Guest Posts: n/a	Re: fitting scotoiler injector to point is the universal kit the one you need for the sv?

13-05-07, 10:07 AM	#5
Stu Trinity Mega Poster Join Date: Jun 2006 Location: Guildford Posts: 8,027	Re: fitting scotoiler injector to point On the scottoiler site if you download the fitting instructions for a pointy SV it has a picture of an SV1000 swingarm with the dispenser attached to the swing arm bobbin. Basically you need to have swingarm protectors fitted, then you place the scottoiler bracket behind the protector. http://www.scottoiler.com/userfiles/...%20SV1000S.pdf

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fitting GSXR1000 Shock to my Pointy	xXBADGERXx	SV Talk, Tuning & Tweaking	37	04-07-10 07:02 AM
Abba pointy fitting kit	FG1	Stuff Wanted	2	06-10-08 07:35 AM
Abba stand fitting kit for Pointy	Gazza77	For Sale - SV's and SV related items	7	28-07-08 12:34 PM
fitting scotoiler to pointy guide	steveg	SV Talk, Tuning & Tweaking	3	08-05-07 08:57 PM
SV 650 CAMS wanted K3-K6 injector pointy cams wanted	alien19779	Stuff Wanted	3	09-03-06 07:01 PM