Suzy got nekkid!! - Page 2 - SV650.org

yorkie_chris · 25-01-08, 06:58 PM

Scalds I can live with, it's the going and making another one that gets to you GRRR!

On a brighter note dizzy is down at mine tomorrow so she can make em muahaha

dizzyblonde · 25-01-08, 07:01 PM

aye just had a thought maybe we should try beginners luck with them studs.....it worked on them choke cables if ya remember

anyway you still haven't learnt to make brews in my house yet, so i think its only fair you make em in yours....lol

northwind · 25-01-08, 07:01 PM

Quote:

Originally Posted by Lissa

Make you realise that all the blisters, skinned knuckles and scalds from spilled tea are worthwhile

Especially when they're not your blisters, knuckles and scalds

Lissa · 25-01-08, 07:02 PM

Quote:

Originally Posted by northwind

Especially when they're not your blisters, knuckles and scalds

Exactly.................the best kind

yorkie_chris · 25-01-08, 07:04 PM

Quote:

Originally Posted by dizzyblonde

aye just had a thought maybe we should try beginners luck with them studs.....it worked on them choke cables if ya remember

anyway you still haven't learnt to make brews in my house yet, so i think its only fair you make em in yours....lol

Just remember its £50 a bolt to get them spark eroded out.

I did make a brew at yours once, and I'm the one doing the spannering, so pfffft, you make the brews.

dizzyblonde · 25-01-08, 07:10 PM

tell yer wot, you get them studs out nice n clean, save me brass and i'll get some cream buns in......and you can make the brews!!!!!!!

northwind · 25-01-08, 07:29 PM

Quote:

Originally Posted by yorkie_chris

Just remember its £50 a bolt to get them spark eroded out.

Cheaper to swap the heads

northwind · 25-01-08, 07:33 PM

Quote:

Originally Posted by yorkie_chris

Just remember its Â£50 a bolt to get them spark eroded out.

Cheaper to swap the barrel if it comes to that, maybe.

pmapp · 26-01-08, 12:18 AM

Quote:

Originally Posted by dizzyblonde

i'll get some cream buns in......and you can make the brews!!!!!!!

mmmmmmm, buns.

Time should I turn up?

26-01-08, 08:33 AM

If they're studs with nuts I'd just split the nuts, or Dremel them off, then run a die down the threads and put them back the way they were with a good dollop of high temp copper grease on the threads and brass nuts. I did this to my mates early Hinckley Triumph a while back and they were fine when the exhaust needed to come off a few years later.

If you've got the cheese cap-head bolts that Suzuki fit as standard, or hex head ones, then you're in for fun and games involving heat and Plus-gas, with a possible appearance from drills and taps.

Get them out and stick some exhaust studs in with brass nuts.

25-01-08, 06:58 PM	#11
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: Suzy got nekkid!! Scalds I can live with, it's the going and making another one that gets to you GRRR! On a brighter note dizzy is down at mine tomorrow so she can make em muahaha __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

25-01-08, 07:01 PM	#12
dizzyblonde Da Cake Boss Mega Poster Join Date: May 2007 Location: On a flying Horse Posts: 9,992	Re: Suzy got nekkid!! aye just had a thought maybe we should try beginners luck with them studs.....it worked on them choke cables if ya remember anyway you still haven't learnt to make brews in my house yet, so i think its only fair you make em in yours....lol __________________ Suzy, yellow 2001 SVS. Kitty, V-Raptor 1000, ZZR1400<<its my bike now Pegasus! Hovis 13.8.75-3.10.09 Reeder 20.7.88-21.3.12

25-01-08, 07:10 PM	#16
dizzyblonde Da Cake Boss Mega Poster Join Date: May 2007 Location: On a flying Horse Posts: 9,992	Re: Suzy got nekkid!! tell yer wot, you get them studs out nice n clean, save me brass and i'll get some cream buns in......and you can make the brews!!!!!!! __________________ Suzy, yellow 2001 SVS. Kitty, V-Raptor 1000, ZZR1400<<its my bike now Pegasus! Hovis 13.8.75-3.10.09 Reeder 20.7.88-21.3.12

26-01-08, 08:33 AM	#20
Lozzo Guest Posts: n/a	Re: Suzy got nekkid!! If they're studs with nuts I'd just split the nuts, or Dremel them off, then run a die down the threads and put them back the way they were with a good dollop of high temp copper grease on the threads and brass nuts. I did this to my mates early Hinckley Triumph a while back and they were fine when the exhaust needed to come off a few years later. If you've got the cheese cap-head bolts that Suzuki fit as standard, or hex head ones, then you're in for fun and games involving heat and Plus-gas, with a possible appearance from drills and taps. Get them out and stick some exhaust studs in with brass nuts.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unexpected whining on Suzy??	dizzyblonde	SV Talk, Tuning & Tweaking	20	11-08-11 09:45 PM
Suzy bares all!!	dizzyblonde	Photos	168	24-07-08 11:11 PM
Rear Coil for SUZY	dizzyblonde	Stuff Wanted	3	24-07-08 10:48 PM
Not an SV but a Suzy, will it do?	skint	Bikes - Talk & Issues	19	10-07-07 07:15 AM
My nekkid SV	Tuco	Photos	1	04-09-05 07:27 PM