SV650.org - SV650 & Gladius 650 Forum



Bikes - Talk & Issues Newsworthy and topical general biking and bike related issues. No crapola!
Need Help: Try Searching before posting

Reply
 
Thread Tools
Old 06-01-09, 12:07 AM   #11
yorkie_chris
Noisy Git
Mega Poster
 
yorkie_chris's Avatar
 
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
Default Re: Abba (stands).....

Dangerous dave did me the measurements, maybe he could pop the pic up on here?

Edit: well it was http://forums.sv650.org/showthread.php?t=113413 here, but pic is no longer floating around cyberspace.
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat
yorkie_chris is offline   Reply With Quote
Old 06-01-09, 12:29 AM   #12
aarond
Guest
 
Posts: n/a
Default Re: Abba (stands).....

Well here is hopeing he sees this cheers might send him a pm
  Reply With Quote
Old 06-01-09, 12:45 AM   #13
muffles
Guest
 
Posts: n/a
Default Re: Abba (stands).....

Quote:
Originally Posted by Sid Squid View Post
Abba doesn't use tapered pins, (it has adapters specific to each bike), and isn't as stable or easy to use.

That said there's nothing wrong with the Abba, it's just that the NWS is better, you're only going to buy one - get the right one.
Is there a kit available that provides tapered pins? I've only ever seen an Abba in the flesh once...around 2-3 years ago...and it had a tapered pin attachment. It was being attached to my pointy, and I'm almost certain it wasn't a kit specific to the SV?

Alternatively, I did see a universal adaptor kit for the Abba actually, it's not tapered pins but it'll fit any M8 bolt hole - e.g. footpeg holes.
  Reply With Quote
Old 06-01-09, 12:46 AM   #14
yorkie_chris
Noisy Git
Mega Poster
 
yorkie_chris's Avatar
 
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
Default Re: Abba (stands).....

Aye that's the abba swingarm removal tool
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat
yorkie_chris is offline   Reply With Quote
Old 06-01-09, 01:12 AM   #15
aarond
Guest
 
Posts: n/a
Default Re: Abba (stands).....

Quote:
Originally Posted by yorkie_chris View Post
Aye that's the abba swingarm removal tool
em i have got that it is actually just some bolts driled through where the pins are and the instructions say to remove one of the footrest hanger bolts and use them in its place i think
  Reply With Quote
Old 06-01-09, 01:21 AM   #16
yorkie_chris
Noisy Git
Mega Poster
 
yorkie_chris's Avatar
 
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
Default Re: Abba (stands).....

Yup.
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat
yorkie_chris is offline   Reply With Quote
Old 06-01-09, 02:53 AM   #17
hob
Guest
 
Posts: n/a
Default Re: Abba (stands).....

Abba is a pita to use on a pointy, unsure if I am not doing something correctly, but it cannot afaik be raised with the side stand down.

Thus it requires some fiddling with to "tighten" up the stand, whilst at the same time raising the kick stand, all whilst keeping the bike upright.

Nice bit of kit but need a bit of a balancing act when there is just one person to operate it.
  Reply With Quote
Old 06-01-09, 08:20 AM   #18
Tiger 55
Guest
 
Posts: n/a
Default Re: Abba (stands).....

Quote:
Originally Posted by hob View Post
Abba is a pita to use on a pointy
You're doing it wrong!
  Reply With Quote
Old 06-01-09, 09:28 AM   #19
etuna
Guest
 
Posts: n/a
Default Re: Abba (stands).....

Quote:
Originally Posted by hob View Post
Abba is a pita to use on a pointy, unsure if I am not doing something correctly, but it cannot afaik be raised with the side stand down.

Thus it requires some fiddling with to "tighten" up the stand, whilst at the same time raising the kick stand, all whilst keeping the bike upright.

Nice bit of kit but need a bit of a balancing act when there is just one person to operate it.
eh? I bought this on the basis that it was generally easy to use individually unlike paddock stands. Hmmmm
  Reply With Quote
Old 06-01-09, 10:07 AM   #20
Ceri JC
Guest
 
Posts: n/a
Default Re: Abba (stands).....

Quote:
Originally Posted by hob View Post
Abba is a pita to use on a pointy, unsure if I am not doing something correctly, but it cannot afaik be raised with the side stand down.
The way I use it you can; the abba stand partially folds the sidestand up (about 1/3 of the way) as you rotate the abba stand into place. You can then flip up the sidestand the rest of the way by hand whilst it's in place.

As an aside, I actually find it takes more time to use the Abba stand than a paddock stand (which I can also use on my own quite happily), although it's still easy/quick. I tend to use it when I'll be doing anything that requires the bike to be held more firmly or the rear suspension to be uncompressed.
  Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Abba Stands-not the normal question. arcdef Hardware 21 08-03-09 04:30 PM
nws stands no longer available? aarond Bikes - Talk & Issues 20 03-12-08 10:00 AM
Paddock stands, so many which ones are best? krhall Bikes - Talk & Issues 13 24-04-08 04:39 PM
Bike Stands 600+ Bikes - Talk & Issues 23 06-03-08 04:07 PM
NWS/Abba "swingarm" type stands tomjones2 Bikes - Talk & Issues 1 12-11-07 01:17 PM


All times are GMT. The time now is 11:56 AM.


Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.