Sv 650 speedo drive cable needed for 2000 model - Page 2 - SV650.org

yorkie_chris · 18-01-12, 08:49 AM

About £15 for the rotor.
I have never seen a broken sensor (£100+), but loads of rotors.

Only thing I've seen other than rotors, and wiring faults making both speed and tacho jump about, was when wire for sensor had been squashed in lockstop.

18-01-12, 09:50 AM

Do the blades go in the sensor on the wheel not had my sv that long not to clued up on them cheers for the help Chris if so were can I buy one if I need it

yorkie_chris · 18-01-12, 09:53 AM

There is a drum which runs within the sensor, and 4 tangs which are driven by the wheel, these end up snapping off.

andrewsmith · 18-01-12, 11:50 AM

Quote:

Originally Posted by swifty09

Do the blades go in the sensor on the wheel not had my sv that long not to clued up on them cheers for the help Chris if so were can I buy one if I need it

I may have a drive rotor in the house if it is that is the case.
I'll check the state of mine at the weekend

18-01-12, 02:40 PM

Ok just got home checked battery and negative was tightend more took her for a run was working at first went over a speed bump and it stopped and went over the second it start again ride all the way home was fine any ideas with the extra info

yorkie_chris · 18-01-12, 02:59 PM

Check under green cover under right infill panel, 2 fat live wires go into it, give them a wiggle check they aren't loose.

If they aren't hanging loose then I'd pull front wheel off.

23-01-12, 01:14 PM

Blades are broke 2 of them any ideas were I can get then from any one

yorkie_chris · 23-01-12, 01:25 PM

Robinsons foundry.

Geodude · 23-01-12, 01:26 PM

Try on here http://www.robinsonsfoundry.co.uk/ if its the rotor i think the part number is 34983-21E00

23-01-12, 10:23 PM

Ended up getting one from a local breakers for £30 I'll try and be more carfull with this one thanks every one for your help

18-01-12, 08:49 AM	#11
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: Sv 650 speedo drive cable needed for 2000 model About £15 for the rotor. I have never seen a broken sensor (£100+), but loads of rotors. Only thing I've seen other than rotors, and wiring faults making both speed and tacho jump about, was when wire for sensor had been squashed in lockstop. __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

18-01-12, 09:50 AM	#12
swifty09 Guest Posts: n/a	Re: Sv 650 speedo drive cable needed for 2000 model Do the blades go in the sensor on the wheel not had my sv that long not to clued up on them cheers for the help Chris if so were can I buy one if I need it

18-01-12, 09:53 AM	#13
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: Sv 650 speedo drive cable needed for 2000 model There is a drum which runs within the sensor, and 4 tangs which are driven by the wheel, these end up snapping off. __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

18-01-12, 02:40 PM	#15
swifty09 Guest Posts: n/a	Re: Sv 650 speedo drive cable needed for 2000 model Ok just got home checked battery and negative was tightend more took her for a run was working at first went over a speed bump and it stopped and went over the second it start again ride all the way home was fine any ideas with the extra info

18-01-12, 02:59 PM	#16
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: Sv 650 speedo drive cable needed for 2000 model Check under green cover under right infill panel, 2 fat live wires go into it, give them a wiggle check they aren't loose. If they aren't hanging loose then I'd pull front wheel off. __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

23-01-12, 01:14 PM	#17
swifty09 Guest Posts: n/a	Re: Sv 650 speedo drive cable needed for 2000 model Blades are broke 2 of them any ideas were I can get then from any one

23-01-12, 01:25 PM	#18
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: Sv 650 speedo drive cable needed for 2000 model Robinsons foundry. __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

23-01-12, 01:26 PM	#19
Geodude Member Mega Poster Join Date: Jun 2009 Location: Durham Posts: 2,675	Re: Sv 650 speedo drive cable needed for 2000 model Try on here http://www.robinsonsfoundry.co.uk/ if its the rotor i think the part number is 34983-21E00 __________________ Black naked 1999 sv650 which im trying to keep happy Custom paintwork *Saragon Customs* Spray painting *Electrical fault finding guide* and *Regulator rectifier test* Only a biker knows why a dog sticks his head out of a car window.

23-01-12, 10:23 PM	#20
swifty09 Guest Posts: n/a	Re: Sv 650 speedo drive cable needed for 2000 model Ended up getting one from a local breakers for £30 I'll try and be more carfull with this one thanks every one for your help

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pointy model Speedo drive basically Brand New £38	sv650k4	For Sale - SV's and SV related items	15	30-12-11 02:17 AM
k5 speedo drive same as 2000	boo86	SV Talk, Tuning & Tweaking	1	17-06-09 07:40 AM
Speedo Cable Needed	tonyfarr	Stuff Wanted	0	11-06-09 02:41 PM
has the sv650 99 speedo drive cable . elec	hellraiser6661	Bikes - Talk & Issues	3	27-08-05 11:04 AM