Recommend me some rear-sets - Page 2 - SV650.org

northwind · 18-04-06, 12:57 PM

Harris sell individual parts too, you just need to phone them up and speak to them. So do Woodcraft for that matter... Most manufacturers will, but it can be hard to find a source sometimes.

18-04-06, 01:01 PM

Quote:

Originally Posted by northwind

Harris sell individual parts too, you just need to phone them up and speak to them. So do Woodcraft for that matter... Most manufacturers will, but it can be hard to find a source sometimes.

I just remember at work trying to get a couple of parts out of Harris and it was a nightmare. They led us to believe that they were only selling them to us because we were a dealer.

northwind · 18-04-06, 01:07 PM

Might depend on their mood then

TSM · 18-04-06, 01:27 PM

For gilles bits.

Apex Lesure
Proformance Parts

I knew that both did parts, i ordered from Apex but the packet still had the preformance parts logo behind the label to me.

18-04-06, 02:32 PM

i got blue harris rear sets!
dont buy these as they break everytime you drop it!

18-04-06, 02:50 PM

Ive got VALTERMOTO rearsets on my curvey £134.00 from Heingerick look the muts nuts!!!!!! I'l try and post you a pic. later!!!

18-04-06, 03:35 PM

Quote:

Originally Posted by BILLY

Ive got VALTERMOTO rearsets on my curvey £134.00 from Heingerick look the muts nuts!!!!!! I'l try and post you a pic. later!!!

I think I've found a winner:
http://www.kneedraggers.com/details/...0--505592.html

Now, does anyone know a UK distributor for Valtermoto, who would have them in stock?

TSM · 18-04-06, 03:51 PM

Quote:

Originally Posted by the oaf

Quote:

Originally Posted by BILLY

Ive got VALTERMOTO rearsets on my curvey £134.00 from Heingerick look the muts nuts!!!!!! I'l try and post you a pic. later!!!

I think I've found a winner:
http://www.kneedraggers.com/details/...0--505592.html

Now, does anyone know a UK distributor for Valtermoto, who would have them in stock?

PDQ sell them in the UK

18-04-06, 04:36 PM

I've got the basic Valtermoto on my race bikes, quite like them.
May get them for my road bike when I got a bit of cash.

They seem to crash fairly well with the cheapest bit breaking generally - so the peg rather than the hanger etc.

They do do adjustable ones as well, but I'm poor

.
Cost me £30 to get a brake lever bit with peg etc - basically everything for the right hand side, bar the hanger!

G

18-04-06, 04:38 PM

Quote:

Originally Posted by TSM

PDQ sell them in the UK

Had a quick look, but it doesn't look like PDQ bother with the type 3's for the SV.

18-04-06, 12:57 PM	#11
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,083	Harris sell individual parts too, you just need to phone them up and speak to them. So do Woodcraft for that matter... Most manufacturers will, but it can be hard to find a source sometimes. __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

18-04-06, 01:07 PM	#13
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,083	Might depend on their mood then __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

18-04-06, 01:27 PM	#14
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	For gilles bits. Apex Lesure Proformance Parts I knew that both did parts, i ordered from Apex but the packet still had the preformance parts logo behind the label to me. __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
after market rear sets / rear break lights	etuna	SV Talk, Tuning & Tweaking	2	16-02-09 09:38 PM
Rear Sets	newts924	SV Talk, Tuning & Tweaking	3	13-11-08 10:21 PM
Rear sets	sweepdoggydog	SV Talk, Tuning & Tweaking	2	19-10-08 02:51 AM
Rear sets for K3	airbrush_assasin	Stuff Wanted	0	10-09-08 10:30 AM
My Rear Sets	Richie	SV Talk, Tuning & Tweaking	3	10-06-05 11:27 PM

18-04-06, 02:32 PM	#15
socommk23 Guest Posts: n/a	i got blue harris rear sets! dont buy these as they break everytime you drop it!

18-04-06, 02:50 PM	#16
BILLY Guest Posts: n/a	Ive got VALTERMOTO rearsets on my curvey £134.00 from Heingerick look the muts nuts!!!!!! I'l try and post you a pic. later!!!

18-04-06, 04:36 PM	#19
G - renamed Guest Posts: n/a	I've got the basic Valtermoto on my race bikes, quite like them. May get them for my road bike when I got a bit of cash. They seem to crash fairly well with the cheapest bit breaking generally - so the peg rather than the hanger etc. They do do adjustable ones as well, but I'm poor . Cost me £30 to get a brake lever bit with peg etc - basically everything for the right hand side, bar the hanger! G