Wonky Exhaust!

[Stu]

[quote="TSM"]

Originally Posted by Stu

The engine, frame, exhaust & rear sub frame are still all in the same place in relation to each other, even the swingarm is, just the extended angle is diffrent to norm.

I was thinking the frame (where the exhaust starts out) and the rear sub frame (where it attaches to the pillion peg) changed angle.

But it's just the swing arm in relation to the rear sub frame that changes?

Ah OK

Originally Posted by Viney

You got any photos?

Fraid not! No digital camera malarkey!
Sticking out to the side (as you look at the back of the bike) Yes!
Sticking up in the air (as you look at the side of the bike)
Too long (Extending past the rear wheel too much)

??

I've called Quill and they say there's a small chance they have sent me the wrong link pipe. they're gonna send me a different one to try, so wish me luck!

[Viney]

Originally Posted by Pigbunk

I've called Quill and they say there's a small chance they have sent me the wrong link pipe. they're gonna send me a different one to try, so wish me luck!

Luck sent, but its definitly the link pipe. It took me ages to line mine up when i had a blu flame, but got there in the end

Originally Posted by TSM

Yep there are two diffrent link pipes for the pointy SVs, one will make it stick out too much the other will be ok. I beleave that it was Blue Flame that someone was having a hell of a time telling them that the link pipes were diffrent.

I think this may be the one you are on about TSM

Click here

Did you get any spacers to space the pillion hanger out? With the spacers behind the hanger you can twist the link pipe around more!!!!

Originally Posted by BILLY

Did you get any spacers to space the pillion hanger out? With the spacers behind the hanger you can twist the link pipe around more!!!!

But that'd just make it stick out even more at the back, surely?

Ok, forgive the fact that it's dark outside...






Maybe I'll try that again in the morning...


You can probably see that it looks a bit grenade launcher-y!

Try putting the exhaust on the hanger the otherside of the bracket.. that will bring it back a lot...

actualy, I would say that is your problem right there.... the exhaust bracket is on the wrong side of the footpeg.. you want it on the back end of the peg, and not the front...

No go. Because the exhaust sticks out so much, I can only mount it on the outside of the hanger. I'm gonna have to put up with it for a while, as I have no link piupe to re-mount the original.

Poo!

It should go on like this...

http://i97.photobucket.com/albums/l2...oy2k/zorst.jpg