Oops..

let ebay and the .Org be your friends....

[Spikenipple]

Originally Posted by jamesterror

I'm hoping it can be done for less than £200 but I think thats a bit ambitions with used parts, as I said previously its jsut the bars that concern me.

You can sort the bike out for less than £200 with brand new parts.
Brand new sets of bungs (even though you only need 1 bung and the bolt, try ringing R&G) = £75ish
New bar ends = £30ish
New gear lever = £50
Renthal bars = £25-£30

tadaaaa

Originally Posted by jamesterror

I have, but I have the naked model. Bars might be able to be straightened, I'll see how it go

Close matching tube over the end should straighten them if not too bad.
I can help if needed and your not too far away

Originally Posted by Spikenipple

You can sort the bike out for less than £200 with brand new parts.
Brand new sets of bungs (even though you only need 1 bung and the bolt, try ringing R&G) = £75ish
New bar ends = £30ish (if my bar ends fit they are free)
New gear lever = £50
Renthal bars = £25-£30

tadaaaa

phil

[jamesterror]

Originally Posted by specialone

Close matching tube over the end should straighten them if not too bad.
I can help if needed and your not too far away

I may take you up on that offer!

Originally Posted by Spikenipple

You can sort the bike out for less than £200 with brand new parts.
Brand new sets of bungs (even though you only need 1 bung and the bolt, try ringing R&G) = £75ish
New bar ends = £30ish
New gear lever = £50
Renthal bars = £25-£30

tadaaaa

That makes me smile more, probably try and pick the gear lever up second hand to save a bit of dollar.

Just hoping the knock hasn't caused any mechanical damage, but it rode home pretty smooth.

[Dave20046]

Got some alloy coloured renthals £15 + p&p
Or can get purple

[Dave20046]

new gear lever £50? lol Paid £10 inc p&p for a brand new'n off ebay

My r&G barends were £16 new + p&p

James , I have a spare Gear Peg that the guy from Fixer-Peg sent me , it was a freaky Dark Blue anodised one he sent me for fun as I had already ordered a normal one from him . Has been in my toolbox for the best part of a year waiting for some muppet to break theirs , PM your addy and you win it


Hope this helps you get back on the road , just file your old lever flat where it snapped off and drill it with a 6mm drill , put supplied bolt into hole and screw new peg in place .

[Spikenipple]

Originally Posted by Dave20046

new gear lever £50?

Yup a genuine Suzuki lever from the parts counter at your local dealer is just over £50.

Glad your ok,sounds like the bike got off lightly too.