Top speed...not very speedy.... - SV650.org

31-03-09, 02:25 PM

I was on my way back from work and thought I ll give her a run as I only hgot her 2weeks ago.everything wAs fine until 95mph...she wouldn't go any further.she pulls fine from start and revs over 8k but still...any ideas?

31-03-09, 02:26 PM

TRY TOP GEAR---------------or is it restricted?

31-03-09, 02:27 PM

Quote:

Originally Posted by panosm

I was on my way back from work and thought I ll give her a run as I only hgot her 2weeks ago.everything wAs fine until 95mph...she wouldn't go any further.she pulls fine from start and revs over 8k but still...any ideas?

Restricted bike.

31-03-09, 02:28 PM

Restricted points too...Just because it revs over 8k, doesn't mean it cant be restricted. Or maybe, your about 40 million teeth up on the rear sprocket

EDIT: If that is a case, lemme have a go

31-03-09, 03:04 PM

the sprocket at the back is the standard one so the answer is restricted bike then....
How easy and how expensive/cheap is it to de-restrict it?
i m sorry about the luck of knowledge but this is my first bike in the UK and before UK there were no restrictions in place...

31-03-09, 03:09 PM

What bike is it? Where you live?

31-03-09, 03:13 PM

hello, it is an sv650 s y reg and i live in portsmouth..quite a way from you

31-03-09, 03:15 PM

Hmm, yeah, always useful to put up type of bike and your location, a nice orger may offer some help if they know what they are doing. Could be carb washers or the official Suzuki kit I think.

31-03-09, 03:28 PM

Quote:

Originally Posted by Dicky Ticker

TRY TOP GEAR---------------or is it restricted?

nice one but i m not that thick

31-03-09, 03:32 PM

Quote:

Originally Posted by panosm

How easy and how expensive/cheap is it to de-restrict it?

Depends on whether it is a carb'd bike or fuel injected. Carbs are generally restricted with washers whereas FI bikes have a restricted ECU.

Not sure if a Y plate is curvy or pointy?

31-03-09, 02:25 PM	#1
panosm Guest Posts: n/a	Top speed...not very speedy.... I was on my way back from work and thought I ll give her a run as I only hgot her 2weeks ago.everything wAs fine until 95mph...she wouldn't go any further.she pulls fine from start and revs over 8k but still...any ideas?

31-03-09, 02:26 PM	#2
Dicky Ticker Guest Posts: n/a	Re: Top speed...not very speedy.... TRY TOP GEAR---------------or is it restricted?

31-03-09, 02:28 PM	#4
plowsie Guest Posts: n/a	Re: Top speed...not very speedy.... Restricted points too...Just because it revs over 8k, doesn't mean it cant be restricted. Or maybe, your about 40 million teeth up on the rear sprocket EDIT: If that is a case, lemme have a go

31-03-09, 03:04 PM	#5
panosm Guest Posts: n/a	Re: Top speed...not very speedy.... the sprocket at the back is the standard one so the answer is restricted bike then.... How easy and how expensive/cheap is it to de-restrict it? i m sorry about the luck of knowledge but this is my first bike in the UK and before UK there were no restrictions in place...

31-03-09, 03:09 PM	#6
plowsie Guest Posts: n/a	Re: Top speed...not very speedy.... What bike is it? Where you live?

31-03-09, 03:13 PM	#7
panosm Guest Posts: n/a	Re: Top speed...not very speedy.... hello, it is an sv650 s y reg and i live in portsmouth..quite a way from you

31-03-09, 03:15 PM	#8
plowsie Guest Posts: n/a	Re: Top speed...not very speedy.... Hmm, yeah, always useful to put up type of bike and your location, a nice orger may offer some help if they know what they are doing. Could be carb washers or the official Suzuki kit I think.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Woo hoo for Speedy Claire	Shellywoozle	The Border Patrol	3	17-12-08 11:44 PM
Speedy and Lucky go south!	Luckypants	EuroTour	58	28-10-08 11:35 PM
oi! Speedy!	BabyJ	Idle Banter	2	17-06-06 04:28 PM
Public Thankyou to Speedy:	MrMessy	Idle Banter	6	07-06-06 10:13 PM
Speedy response	Beenz	Idle Banter	9	05-05-06 03:00 PM