 |
 |
| SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
 |
|
|
Thread Tools |
12-04-09, 09:23 PM
|
#1 |
|
Guest
Posts: n/a
|
Hole in intake rubber?
Cleaned up my secondhand engine and put it on the bench ready for the rebuild and i noticed a hole in the rear rubber tube the carbs go onto. Does a vacuum hose go into it or has it been bored for a scotoiler vacumm hose feed. thanks Cammy
|
|
|
12-04-09, 09:30 PM
|
#2 |
|
No, I don't lend tools.
Mega Poster
Join Date: Jul 2003
Location: Skunk Works, Nth London
Posts: 8,680
|
Re: Rubber boots
__________________
If an SV650 has a flat tyre in the forest and no-one is there to blow it up, how long will it be 'til someone posts that the reg/rec is duff and the world will end unless a CBR unit is fitted? A little bit of knowledge = a dangerous thing. "a deathless anthem of nuclear-strength romantic angst" |
|
|
|
12-04-09, 09:43 PM
|
#3 |
|
Guest
Posts: n/a
|
Re: Hole in intake rubber?
Sorry sv650 1999
|
|
|
|
12-04-09, 09:45 PM
|
#4 |
|
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
Re: Hole in intake rubber?
Vacuum hose, should have a brass spigot on it.
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
|
|
|
|
12-04-09, 09:50 PM
|
#5 |
|
Guest
Posts: n/a
|
Re: Hole in intake rubber?
There is no carbs mounted on the engine yet still to get them just the rubber mounts on engine if this helps
|
|
|
|
12-04-09, 09:52 PM
|
#6 |
|
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
Re: Hole in intake rubber?
Vacuum for the fuel tap comes from the rear carb. Vacuum for the fuel pump comes from the hole ... it should be on the right hand side of the rear rubber IIRC.
A tube pushes onto a brass spigot. If it's just a hole then they've probbly yanked the hose and spigot out. as one bit.
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
|
|
|
|
12-04-09, 09:59 PM
|
#7 |
|
Guest
Posts: n/a
|
Re: Hole in intake rubber?
And its on the rear boot none on front the boot
|
|
|
|
12-04-09, 10:04 PM
|
#8 |
|
Guest
Posts: n/a
|
Re: Hole in intake rubber?
Thanks spot on looked on parts drawings but did not see anything so thats why i asked thanks again hope u can buy one
|
|
|
|
12-04-09, 10:17 PM
|
#9 |
|
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
Re: Hole in intake rubber?
Just take the intake boot off tother motor when you swap it...
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
|
|
|
|
12-04-09, 10:38 PM
|
#10 |
|
Guest
Posts: n/a
|
Re: Hole in intake rubber?
Dont have another engine building from scratch i have got a real challenge the site will be fed up with my questions
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| WANTED: SV1000 Snorkel / Intake pipe | The Guru | Stuff Wanted | 3 | 19-05-09 07:47 AM |
| Air intake question | John 675 | SV Talk, Tuning & Tweaking | 9 | 08-01-08 12:20 AM |
| Curvey intake valves and some collets | svrash | Stuff Wanted | 2 | 30-01-07 09:48 PM |
| intake cams SV650 K3> | r4ce_e3nd | Stuff Wanted | 3 | 29-05-06 10:08 PM |
| Air Intake! | InvisableGeek | SV Talk, Tuning & Tweaking | 25 | 31-03-05 06:35 PM |
