 |
 |
| SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
 |
|
|
Thread Tools |
03-06-10, 08:56 PM
|
#1 |
|
Guest
Posts: n/a
|
Removed STV - now won't run.
ok bored out my spare throttle bodies and fitted bigger butterflys totally scrapped all the computer controlled secondary stuff my guessing was that it should run but with fault codes am i right in thinking this as it wont start now
|
|
|
03-06-10, 09:07 PM
|
#2 | |
|
The Sick Man
Mega Poster
Join Date: Nov 2004
Location: Peckham.SE.LDN
Posts: 4,768
|
Re: bored out throttle bodies
Quote:
if you want to remove this stuff there are ways usualy involving resistors etc, but not sure for such a major component as an actuator which i suspect has some feedback loop
__________________
OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions |
|
|
|
|
03-06-10, 09:35 PM
|
#3 |
|
Guest
Posts: n/a
|
Re: bored out throttle bodies
yes i did plug a second pair of throttle bodies into the system that was removed but still no joy i have also tried a set of throttle bodies manually opened the actuator and unplugged the top end components and the bike did run with the fi light on think i will just keep trying components maybe it will worl maybe it wont
|
|
|
|
03-06-10, 09:36 PM
|
#4 |
|
The Sick Man
Mega Poster
Join Date: Nov 2004
Location: Peckham.SE.LDN
Posts: 4,768
|
Re: bored out throttle bodies
bridge the service mode plug and check the codes and list them
__________________
OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions |
|
|
|
|
03-06-10, 09:43 PM
|
#5 |
|
Guest
Posts: n/a
|
Re: bored out throttle bodies
yes its c14 tps sensor and c28 secondary actuator the thig that i am trying to get across is that before any mods i unpluged the actuator and secondary tps sensor and the bike still ran but since the mods it doesnt
|
|
|
|
03-06-10, 09:52 PM
|
#6 | |
|
The Sick Man
Mega Poster
Join Date: Nov 2004
Location: Peckham.SE.LDN
Posts: 4,768
|
Re: bored out throttle bodies
Quote:
__________________
OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions |
|
|
|
|
|
03-06-10, 10:00 PM
|
#7 |
|
Guest
Posts: n/a
|
Re: bored out throttle bodies
yeah going to put the standard ones back on see what happens then just keep messing till i sort it
|
|
|
|
04-06-10, 09:38 AM
|
#8 |
|
Guest
Posts: n/a
|
Re: Removed STV - now won't run.
have you tried turning it off then on again..
something fizz taught me .. |
|
|
|
07-06-10, 08:46 PM
|
#9 |
|
Guest
Posts: n/a
|
Re: Removed STV - now won't run.
sorted now ended up being a faulty tps sensor so bored out to 42mm time for some dyno to see if it produces a few more horses
|
|
|
|
25-06-10, 10:30 PM
|
#10 |
|
Guest
Posts: n/a
|
Re: Removed STV - now won't run.
just to let you guys know it added around 4 bhp and upped the torque curve as well so pushing just above 80bhp so it not a bad little mod really
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Baffle Removed | hindle8907 | SV Talk, Tuning & Tweaking | 20 | 17-06-09 09:38 PM |
| Just had a listing removed from ebay... | Paul the 6th | Idle Banter | 25 | 21-11-08 11:40 PM |
| Has anyone ever removed the whole petrol cap? | DarrenSV650S | SV Talk, Tuning & Tweaking | 14 | 02-10-07 04:54 AM |
| Removed | Stu | For Sale - SV's and SV related items | 5 | 18-08-06 09:05 AM |
| removed | tigersaw | For Sale - SV's and SV related items | 0 | 16-05-06 01:47 PM |
