Wires and Electrics - SV650.org

17-12-10, 07:23 PM

Hi, just been looking at the bike for next season 2001 sorted the Brake line issue out but now its the elecrics and wow they are a mess, want to build a minimal keyless loom but not sure if i would be able to do it with very little experience in electrics etc.

Has any one done one and how simple is it to do?

Would it just be a case of copy he pic or more technical?

17-12-10, 09:14 PM

HI pal,
Message tony TC252
hes JUST wired his together !

mick

andrewsmith · 17-12-10, 11:27 PM

PM Berlin or Yorkie_Chris or TC252 (as mike said)

they've all had (or having) experience of the minimal loom

18-12-10, 07:42 AM

here's thew info on the racing loom for a curvy

C

18-12-10, 03:11 PM

Hi Rob.
Use the link on Berlins reply and you'll get the wiring diagram-it works!!
Only thing you must get right is the 100 ohm resistor-but you can get them cheap as chips off e-bay!!
I had actually got my loom to within 3 wires off this diagram-just cos I wasn't sure whether to keep throttle position sensor!
I didn't have any probs doing the job-but I did work on Tornado electrics for 3 years!!

Any probs get in touch.

TC 252

18-12-10, 05:45 PM

Thanks for the advice and diagram guys, had a good chat with Yorkie_cris today and i think its all going to be OK with some help from him. Im always worried about doing any electrics, don't have a mechanical back ground as im a Combat Medic still serving in the Medical Corps.

Thanks again

18-12-10, 10:26 PM

Hi Rob,
just wondering which club you plan racing with next season?
I'm in the NEMCRC-the Minitwin class there is thriving-a great bunch!!
Our first meeting is at Croft 9/10 April!
Hope to see you there!!

TC 252

andrewsmith · 18-12-10, 11:38 PM

Quote:

Originally Posted by TC252

Hi Rob,
just wondering which club you plan racing with next season?
I'm in the NEMCRC-the Minitwin class there is thriving-a great bunch!!
Our first meeting is at Croft 9/10 April!
Hope to see you there!!

TC 252

Cheers TC save me looking for that date!!

I shall be there in some form

18-12-10, 11:46 PM

Quote:

Originally Posted by andrewsmith

I shall be there in some form

yeh he's rolling with this bad boy machine ....

19-12-10, 08:14 PM

Im going to be running at any club that have dates that im not working, raced with Thundersport this year but cant do half the meetings so going to try and keep it up north as the dates are all looking good.

The clubs that I should be running with will be Auto66, NEMCRC and Aintree

The main plan for next year is to enter at Oliver's Mount if I can get the last 4 signatures on the licence.

Basically I just want to race and have fun.

17-12-10, 07:23 PM	#1
robc76 Guest Posts: n/a	Wires and Electrics Hi, just been looking at the bike for next season 2001 sorted the Brake line issue out but now its the elecrics and wow they are a mess, want to build a minimal keyless loom but not sure if i would be able to do it with very little experience in electrics etc. Has any one done one and how simple is it to do? Would it just be a case of copy he pic or more technical?

17-12-10, 09:14 PM	#2
mike_red2uk Guest Posts: n/a	Re: Wires and Electrics HI pal, Message tony TC252 hes JUST wired his together ! mick

17-12-10, 11:27 PM	#3
andrewsmith Member Mega Poster Join Date: Apr 2010 Location: Newcastle upon Tyne, Just south of salad dodging country Posts: 7,750	Re: Wires and Electrics PM Berlin or Yorkie_Chris or TC252 (as mike said) they've all had (or having) experience of the minimal loom __________________ RIP Reeder 20/07/1988 - 21/03/2012. Always missed squire!!! Every year we meet old friends, gain some new ones, lose old ones and you always remember them all. “Live as if you were to die tomorrow. Learn as if you were to live forever.” Mahatma Gandhi Last edited by andrewsmith; 17-12-10 at 11:32 PM.

18-12-10, 07:42 AM	#4
Berlin Guest Posts: n/a	Re: Wires and Electrics here's thew info on the racing loom for a curvy C

18-12-10, 03:11 PM	#5
TC252 Guest Posts: n/a	Re: Wires and Electrics Hi Rob. Use the link on Berlins reply and you'll get the wiring diagram-it works!! Only thing you must get right is the 100 ohm resistor-but you can get them cheap as chips off e-bay!! I had actually got my loom to within 3 wires off this diagram-just cos I wasn't sure whether to keep throttle position sensor! I didn't have any probs doing the job-but I did work on Tornado electrics for 3 years!! Any probs get in touch. TC 252

18-12-10, 05:45 PM	#6
robc76 Guest Posts: n/a	Re: Wires and Electrics Thanks for the advice and diagram guys, had a good chat with Yorkie_cris today and i think its all going to be OK with some help from him. Im always worried about doing any electrics, don't have a mechanical back ground as im a Combat Medic still serving in the Medical Corps. Thanks again

18-12-10, 10:26 PM	#7
TC252 Guest Posts: n/a	Re: Wires and Electrics Hi Rob, just wondering which club you plan racing with next season? I'm in the NEMCRC-the Minitwin class there is thriving-a great bunch!! Our first meeting is at Croft 9/10 April! Hope to see you there!! TC 252

19-12-10, 08:14 PM	#10
robc76 Guest Posts: n/a	Re: Wires and Electrics Im going to be running at any club that have dates that im not working, raced with Thundersport this year but cant do half the meetings so going to try and keep it up north as the dates are all looking good. The clubs that I should be running with will be Auto66, NEMCRC and Aintree The main plan for next year is to enter at Oliver's Mount if I can get the last 4 signatures on the licence. Basically I just want to race and have fun.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Renewing wires	Lucas	SV Talk, Tuning & Tweaking	8	27-08-09 06:04 PM
Strange wires???	krhall	Bikes - Talk & Issues	5	16-03-07 12:58 PM
indecater wires	hovis	SV Talk, Tuning & Tweaking	4	24-09-06 11:40 AM
2nd/3rd wires	andy owen	SV Talk, Tuning & Tweaking	1	29-01-06 05:08 PM
chafing wires	philb	SV Talk, Tuning & Tweaking	3	13-06-05 06:34 AM