SV650.org - SV650 & Gladius 650 Forum



SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000
Need Help: Try Searching before posting

Reply
 
Thread Tools
Old 14-01-11, 07:30 AM   #1
dazzadams
Guest
 
Posts: n/a
Default Down shift problems

Hi, my sv650 sk3 shifts up gears ok but when changing down
Won't select the next gear, if I give the lever a little tap
With my foot and try again it selects..! Any ideas guys..?






Candy blue k3.. Likes going up but not going down!
  Reply With Quote
Old 14-01-11, 09:17 AM   #2
Sid Squid
No, I don't lend tools.
Mega Poster
 
Sid Squid's Avatar
 
Join Date: Jul 2003
Location: Skunk Works, Nth London
Posts: 8,680
Default Re: Down shift problems

Does the lever move smoothly? A common problem is the pivot being a bit gunged up, try lubricating that first and see if that alters things.
__________________
If an SV650 has a flat tyre in the forest and no-one is there to blow it up, how long will it be 'til someone posts that the reg/rec is duff and the world will end unless a CBR unit is fitted? A little bit of knowledge = a dangerous thing.

"a deathless anthem of nuclear-strength romantic angst"
Sid Squid is offline   Reply With Quote
Old 14-01-11, 09:53 AM   #3
dazzadams
Guest
 
Posts: n/a
Default Re: Down shift problems

Quote:
Originally Posted by Sid Squid View Post
Does the lever move smoothly? A common problem is the pivot being a bit gunged up, try lubricating that first and see if that alters things.
The lever moves smoothly and goes down and stops but doesn't click like they
Do when going into gear, if I tap it with the side of
My foot it feels like it slots back into place and I can the
Select down 1 gear then have to repeat the process for each downward gear.
I will have a clean up tho but have sprayed liberal
Amounts of wd40 all over it

Many thanks.
  Reply With Quote
Old 14-01-11, 11:23 AM   #4
Mr EnDo
Guest
 
Posts: n/a
Default Re: Down shift problems

Quote:
Originally Posted by dazzadams View Post
The lever moves smoothly and goes down and
have sprayed liberal
Amounts of wd40 all over it

Many thanks.
WD40 in one word NOOOOOOO use some thing like GT85 from Halfords, its got PTFE that helps stay on the parts you spary and keeps them from jamming, thats what I did when I had this problem. I find WD40 washes off too easy and also dries up quick.

Last edited by Mr EnDo; 14-01-11 at 11:26 AM.
  Reply With Quote
Old 14-01-11, 12:11 PM   #5
barwel1992
Guest
 
Posts: n/a
Default Re: Down shift problems

WD40 also removes grease and other lubricants i use it only for cleaning parts not for lubing them
  Reply With Quote
Old 14-01-11, 12:31 PM   #6
novocaine
Guest
 
Posts: n/a
Default Re: Down shift problems

detent spring has gone. easy repair but requires removal of the clutch basket.
  Reply With Quote
Old 14-01-11, 01:04 PM   #7
SUPERSTARDJ01
Guest
 
Posts: n/a
Default Re: Down shift problems

Selector forks/pins? what-ever they are, or as everyone says give it a good clean and lube, I get it loads on my Zx6 through winter.
  Reply With Quote
Old 14-01-11, 02:17 PM   #8
_Stretchie_
Large Member
Mega Poster
 
_Stretchie_'s Avatar
 
Join Date: Jan 2006
Location: Minsterworth, Gloucester
Posts: 2,353
Default Re: Down shift problems

If I were you I would make a list of all that is being offered above and then list them in order of easiest to check first and work your way through them.

Couple of questions:
- Where are you?
- You any good with / own any tools?

There could be local .orgers nearby willing to help out.
__________________
How to amuze an idiot:



Look right-> <-Look Left
_Stretchie_ is offline   Reply With Quote
Old 14-01-11, 02:39 PM   #9
dazzadams
Guest
 
Posts: n/a
Default Re: Down shift problems

Ok thanks guys for all your help I'll have a play this weekend
And let you know how it went.
  Reply With Quote
Old 14-01-11, 07:01 PM   #10
Sid Squid
No, I don't lend tools.
Mega Poster
 
Sid Squid's Avatar
 
Join Date: Jul 2003
Location: Skunk Works, Nth London
Posts: 8,680
Default Re: Down shift problems

Quote:
Originally Posted by _Stretchie_ View Post
If I were you I would make a list of all that is being offered above and then list them in order of easiest to check first and work your way through them.
I wonder who would think of doing that? Surely the gearbox should come out the clutch basket should be taken off as first checks.

__________________
If an SV650 has a flat tyre in the forest and no-one is there to blow it up, how long will it be 'til someone posts that the reg/rec is duff and the world will end unless a CBR unit is fitted? A little bit of knowledge = a dangerous thing.

"a deathless anthem of nuclear-strength romantic angst"
Sid Squid is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
sv shift lights, where to set them ? barwel1992 SV Talk, Tuning & Tweaking 20 19-10-10 11:45 AM
Night shift Ed Idle Banter 7 31-03-10 02:52 PM
For the night shift Ed Idle Banter 9 19-08-09 07:50 AM
Gear shift rod Sean_C SV Talk, Tuning & Tweaking 3 21-02-09 08:04 PM
Shift-I Shift Light phizog SV Talk, Tuning & Tweaking 11 09-07-08 12:18 AM


All times are GMT. The time now is 02:25 AM.


Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.