Airline connector leaks? - SV650.org

Bibio · 31-10-12, 12:52 PM

i haven't a clue about them and have been using what i think are called euro ones on the compressor i got from aldi about 4 years ago. problem is the ones i have leak like a burst fizzy drinks can.

recommendations...

Dipper · 31-10-12, 01:15 PM

If it's the threads rather than the connectors leaking then PTFE tape will do the job.

Bibio · 31-10-12, 01:20 PM

its the connectors as i already PTFE tape the threads.

Dipper · 31-10-12, 01:32 PM

I've been using these http://www.machinemart.co.uk/shop/ra...5-B0C43C0232A8 they seem to seal fine and are cheap.

flymo · 31-10-12, 01:51 PM

go to your nearest engineering supplies place, they normally stock this sort of thing.

31-10-12, 02:50 PM

Most engineering suppliers or hydraulic equipment suppliers will have the same type connectors.

Bibio · 01-11-12, 12:22 AM

thanks peeps. i'll try the local tools store but they are all pizz.

Spanner Man · 02-11-12, 09:16 AM

Good morning all.

I find that the best connector for smaller airlines is called ISO B12. They're normally available from good industrial suppliers that stock pneumatic fittings, & they don't cost much more than the PCL type shown in the Machine Mart ad.

Cheers.

Bibio · 02-11-12, 05:28 PM

cheers spannerman

31-10-12, 12:52 PM	#1
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,569	Airline connector leaks? i haven't a clue about them and have been using what i think are called euro ones on the compressor i got from aldi about 4 years ago. problem is the ones i have leak like a burst fizzy drinks can. recommendations...

31-10-12, 01:15 PM	#2
Dipper Member Join Date: Mar 2011 Location: Hockley, Essex Posts: 398	Re: airline connectors If it's the threads rather than the connectors leaking then PTFE tape will do the job.

31-10-12, 01:20 PM	#3
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,569	Re: airline connectors its the connectors as i already PTFE tape the threads.

31-10-12, 01:32 PM	#4
Dipper Member Join Date: Mar 2011 Location: Hockley, Essex Posts: 398	Re: airline connectors I've been using these http://www.machinemart.co.uk/shop/ra...5-B0C43C0232A8 they seem to seal fine and are cheap.

31-10-12, 01:51 PM	#5
flymo Member Mega Poster Join Date: Jan 2008 Location: North West Posts: 3,124	Re: airline connectors go to your nearest engineering supplies place, they normally stock this sort of thing.

31-10-12, 02:50 PM	#6
Dicky Ticker Guest Posts: n/a	Re: Airline connector leaks? Most engineering suppliers or hydraulic equipment suppliers will have the same type connectors.

01-11-12, 12:22 AM	#7
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,569	Re: Airline connector leaks? thanks peeps. i'll try the local tools store but they are all pizz.

02-11-12, 09:16 AM	#8
Spanner Man Member Mega Poster Join Date: May 2005 Location: Sunbury Middlesex Posts: 1,396	Re: Airline connector leaks? Good morning all. I find that the best connector for smaller airlines is called ISO B12. They're normally available from good industrial suppliers that stock pneumatic fittings, & they don't cost much more than the PCL type shown in the Machine Mart ad. Cheers. __________________ Spanner Man http://stewarts-motorcycles.co.uk/default.html

02-11-12, 05:28 PM	#9
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,569	Re: Airline connector leaks? cheers spannerman

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best airline to Bangkok?	Littlepeahead	Idle Banter	12	12-03-12 04:55 PM
My disconnected tank sometimes leaks	DarrenSV650S	SV Talk, Tuning & Tweaking	6	07-02-08 09:29 PM
Oil leaks from the engine	muffles	Bikes - Talk & Issues	5	23-12-07 10:44 AM
Trumped up charge against airline passenger.	Peter Henry	Idle Banter	4	08-12-06 10:38 AM
Connecting pipe leaks	*Steve*	SV Talk, Tuning & Tweaking	6	05-05-06 06:54 PM