Gear link rod thing.............. - SV650.org

18-12-05, 11:48 PM

Will the gear link rod from a TL, bandit or a GSXR fit the SV's

Seen stainless ones on Ebay for the above Here

TSM · 19-12-05, 12:30 AM

I thought the TLS & R had diffrent shift rods.

I know it fits (used a complete rearset of a TL a while back), but not sure which TL mine was from. But if it is any then the TLS is the most likley.

18-12-05, 11:48 PM	#1
svrash Guest Posts: n/a	Gear link rod thing.............. Will the gear link rod from a TL, bandit or a GSXR fit the SV's Seen stainless ones on Ebay for the above Here

19-12-05, 12:30 AM	#2
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	I thought the TLS & R had diffrent shift rods. I know it fits (used a complete rearset of a TL a while back), but not sure which TL mine was from. But if it is any then the TLS is the most likley. __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gear Shift Rod bent - Gear Changing problem	Thaleshwar	SV Talk, Tuning & Tweaking	13	05-06-10 06:28 PM
Wanted Gear link rod conector	Jay12329	Stuff Wanted	0	15-05-09 03:31 PM
gear selector rod thing	husky03	Stuff Wanted	7	31-01-08 07:02 PM
Gear lever rubber (toe thing) K5	dmracing	Stuff Wanted	0	21-06-07 10:27 PM
Anyone used these before (gear sack thing)	pups3000	SV Talk, Tuning & Tweaking	8	18-05-07 04:31 PM