Belly pan that will allow room for micron headers - SV650.org

24-03-07, 12:02 AM

I was looking at a skidmarx belly pan but they are not hollow underneath so i think it would foul on my downpipe, does anybody have a belly pan on their curvy that looks like it would allow room for the lower pipe? If so which one as I need to buy one.

Chris

TSM · 24-03-07, 12:40 AM

mine was skidmarx and it just fitted, the pipe touches the bottom near the middle, not an issue though

24-03-07, 11:53 AM

Does it not melt the plastic?

26-03-07, 09:38 AM

The skidmarx pan is made from fibreglass, with a resin outer coat. Shouldn't melt.

TSM · 26-03-07, 09:41 AM

Quote:

Originally Posted by UKStreetFighter

Does it not melt the plastic?

Not realy "melt", but it does become brittle and cracks, but as its on the underside you cant see it, if you wanted you could cut out the belly pan a little to acomodate the pipe like on other bikes.

Quote:

Originally Posted by Jase22

The skidmarx pan is made from fibreglass, with a resin outer coat. Shouldn't melt.

Mine has cracked and become a little brittle where the pipe touches the pan, but i cant see it so its not an issue.

24-03-07, 12:02 AM	#1
UKStreetFighter Guest Posts: n/a	Belly pan that will allow room for micron headers I was looking at a skidmarx belly pan but they are not hollow underneath so i think it would foul on my downpipe, does anybody have a belly pan on their curvy that looks like it would allow room for the lower pipe? If so which one as I need to buy one. Chris

24-03-07, 12:40 AM	#2
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	Re: Belly pan that will allow room for micron headers mine was skidmarx and it just fitted, the pipe touches the bottom near the middle, not an issue though __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

24-03-07, 11:53 AM	#3
UKStreetFighter Guest Posts: n/a	Re: Belly pan that will allow room for micron headers Does it not melt the plastic?

26-03-07, 09:38 AM	#4
Jase22 Guest Posts: n/a	Re: Belly pan that will allow room for micron headers The skidmarx pan is made from fibreglass, with a resin outer coat. Shouldn't melt.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Headers in Hotmail	gettin2dizzy	Idle Banter	6	18-03-09 10:02 PM
Stainless Steel Micron Race headers/downpipe for Pointys	xXBADGERXx	For Sale - SV's and SV related items	38	31-01-09 06:23 PM
Micron headers for Curvy	maviczap	For Sale - SV's and SV related items	0	29-01-09 08:19 PM
for sale hytera carbon can and micron headers	sottondan	For Sale - SV's and SV related items	14	14-09-08 09:39 PM
micron headers + can?	james160987	Exhausts	1	03-03-06 11:22 PM