Everybody's current curvys

[r4ce_e3nd]

The original SRAD-clipons. I also have from TL (higher) and older gsxr 750 (lower).

I am thinking to put the original N bars....

And beasty she is. :)

[Dave20046]

The original SRAD-clipons. I also have from TL (higher) and older gsxr 750 (lower).

I am thinking to put the original N bars....

And beasty she is. :)
Any TL bars for sale by anychance? :D

[r4ce_e3nd]

Any TL bars for sale by anychance? :D
There is a possibility I will sell them, I don't know yet. :confused::p

[Dave20046]

let me know first if they're TLS bars :)

[jumjum_0214]

This is my baby as she currently is..... Pic taken last summer though :cool:

[r4ce_e3nd]

let me know first if they're TLS bars :)
The high-positioned bars? Then it will be TLS, I don't remember. ;)

[barwel1992]

This is my baby as she currently is..... Pic taken last summer though :cool:

that is bloody clean :thumleft:

[Spanner87]

Well here's my contribution!


ps
Any one have a link to a rack similar to the silver sv on the first page?

http://farm3.static.flickr.com/2738/4390472385_05365f723e_o.jpg


http://farm5.static.flickr.com/4040/4390472429_859be3d1be_o.jpg

[Alpinestarhero]

Spanner, nice curvy

I didnt see any racks on page 1, but i did see a yellow curvy with a topbox rack. and a topbox. on page 2....


is that what you ment :D

[Binky]

http://forums.sv650.org/picture.php?albumid=501&pictureid=3839This the one?

[Spanner87]

ya thats the one, I'm looking to get a top box and don't like the look (and costs) of the givi rack.
Might look into making my own when I get time if I can't find anything off the shelf that will work

[maviczap]

http://forums.sv650.org/picture.php?albumid=501&pictureid=3839This the one?

Yes, I've got a rack like that, Oh wait a minute that IS my rack :p

But that curvy isn't the same anymore, a few pics once its back together

[maviczap]

Here it is in it's current form if you hadn't seen my thread
http://forums.sv650.org/picture.php?albumid=558&pictureid=4127

http://forums.sv650.org/picture.php?albumid=558&pictureid=4128

[fastdruid]

While I remember, I found a picture of it as it was before it became a track bike.
http://www.fastdruid.co.uk/albums/SV650/thumbs/640x480DSCF0002.JPG

Druid

[maviczap]

Finally got mine back out of the garage after fitting the lowers and infills. Still got to polish up the rear wheel to match the front. Managed to tuck a Stebel Nautilus away in the fairing. Split it and tucked the compressor under the seat. Also got to fit an oval end can. But I's happy with the look, compare it with how it was last year

http://forums.sv650.org/attachment.php?attachmentid=6699&d=1271612800

[Electro]

http://sphotos.ak.fbcdn.net/photos-ak-snc1/v2281/148/14/706111065/n706111065_2497118_1660.jpghttp://sphotos.ak.fbcdn.net/photos-ak-snc1/v2281/148/14/706111065/n706111065_2497120_2043.jpghttp://sphotos.ak.fbcdn.net/photos-ak-snc1/v2630/148/14/706111065/n706111065_2845739_3245672.jpghttp://sphotos.ak.fbcdn.net/photos-ak-snc1/v2630/148/14/706111065/n706111065_2845737_2996468.jpg (http://sphotos.ak.fbcdn.net/photos-ak-snc1/v2630/148/14/706111065/n706111065_2845737_2996468.jpg)

My Curvy, I love it :)

[svrich]

And the 2.0 version of mine. I fitted the lowers today and gave it a good clean and polish. I'm pleased wit it again. I have got it looking how it did a year ago, before my off.

[maviczap]

And the 2.0 version of mine. I fitted the lowers today and gave it a good clean and polish. I'm pleased wit it again. I have got it looking how it did a year ago, before my off.

Blimey I didn't think it was that shiney underneath all that dirt.

Looking good

[svrich]

Cheers buddy, I had forgotten that it was a silver bike, I thought it was grey! The amount of dirt that came off the wheels was gross.
I took it out tonight and it felt good to be on it again after two weeks of being stuck in the garage.

[hindle8907]

the curvy does look really good with lovers without well its just looks all wrong.

[Viney]

http://forums.sv650.org/picture.php?albumid=2&pictureid=4264

Doris

64000 miles, used daily, been on the deck 5 times now, she still lives and makes me smile. Now sports a different screen and a HID kit, oh and a few more scrapes

[Jamesy D]

http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs490.snc3/26784_420763325428_507055428_5826424_4163335_n.jpg

My current curvy SV650S 2001 in black (Stealthy Suzy). Just bought her, isn't she pretty ;)

I've actually made a couple of minor cosmetic mods since I took this photo, she now has fluorescent yellow wheel rim tape (it's a very dark bike, I'd like to be seen!) and removed some stickers. Then going to give her a lovely deep clean before adding Stomp Grips and a belly pan of some kind.

[sunshine]

http://photos-f.ak.fbcdn.net/hphotos-ak-ash1/hs437.ash1/24133_110328259002486_100000759361418_79527_397366 7_s.jpg
Heres my curvy at Elan Valley last saturday
http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs397.snc3/24133_110326609002651_100000759361418_79496_347135 7_s.jpg
Heres a slightly closer look keeping the lake in the background

[Cymraeg_Atodeg]

http://forums.sv650.org/picture.php?albumid=2&pictureid=4264

Doris

64000 miles, used daily, been on the deck 5 times now, she still lives and makes me smile. Now sports a different screen and a HID kit, oh and a few more scrapes

Nice stacked cans :smt023

[Phoenix]

Few Little Things changed since these pics like led number plate light etc but still pretty much the same.

http://www.fletchmeister.com/images/sv1.jpghttp://www.fletchmeister.com/images/sv2.jpg

[allantheboss]

[QUOTE=Viney;2246647]http://forums.sv650.org/picture.php?albumid=2&pictureid=4264

Love it! I will buy your twin exhaust for big bucks!

[Wideboy]

http://forums.sv650.org/picture.php?albumid=552&pictureid=4265


fresh off the press from my little bimble this evening

[mjc]

nice. bet that can is somewhat fruity.

[maviczap]

http://forums.sv650.org/picture.php?albumid=552&pictureid=4265


fresh off the press from my little bimble this evening

Header pipe needs a good polish ;););)

[Wideboy]

nice. bet that can is somewhat fruity.

yeah when it stays on :lol:

Header pipe needs a good polish ;););)

pfft will just get dirty again :p

[maviczap]

pfft will just get dirty again :p

Tell me about it. Did you hear the one about the Silver curvy owner, a rubber glove & flexible drive connected to a drill :study:

[Wideboy]

yeah, herd he had to much time on his hands ;)

[maviczap]

yeah, herd he had to much time on his hands ;)

No he nearly ended up in A&E after glove got caught in chuck and had a wrestling match with the flexible drive and drill :rolleyes:

[Wideboy]

No he nearly ended up in A&E after glove got caught in chuck and had a wrestling match with the flexible drive and drill :rolleyes:

sorry but ....... :smt082

[maviczap]

I know an epic fail :???:

[maviczap]

Now with new Fuel end can. Back wheel still needs polishing
http://forums.sv650.org/picture.php?albumid=501&pictureid=4275

http://forums.sv650.org/picture.php?albumid=501&pictureid=4276

[Wideboy]

thats a nice decal you got on teh bottom there ;)

i need to get me one of those corbin (sp?) seats

[maviczap]

thats a nice decal you got on teh bottom there ;)

i need to get me one of those corbin (sp?) seats

Yep, some bleddy nice bloke sorted it out for me

Dats an OEM gel seat on mine

Just get yours recovered, lot cheaper than OEM :rolleyes:

http://www.vikingvinyl.co.uk/News.html

http://www.tonyarcher.co.uk/

[Wideboy]

hmm interesting.... is it loads comfier?, how much?

[maviczap]

hmm interesting.... is it loads comfier?, how much?

Well if you like riding about on the plank standard seat, then no. But I could only manage about 30miles before I started to hate the standard seat.

Now its about 200 with the gel:p

OEM gel seats normally go for over the ton on EBAY, if you can find them

I've seen another service on ebay for £84, ignore the fact its for a Hayabussa, they do all bikes. This price is for a custom recover, but a gel insert is an extra option

http://cgi.ebay.co.uk/Suzuki-Hayabusa-GSXR-1300-1340-Top-Saddlery-Seat-Cover_W0QQitemZ270554085635QQcmdZViewItemQQptZUK_M otorcycl

Vilking basic gel insert is £80 incl fitting, which is half the price of any OEM Suzuki gel seat on Ebay right now. Yer pays your money, yer takes your choice :p

http://shop.ebay.co.uk/?_from=R40&_trksid=p3907.m570.l1313&_nkw=suzuki+gel+seat&_sacat=See-All-Categories

[sam anon]

Here's mine. It was current until about 2 weeks ago.

http://i444.photobucket.com/albums/qq165/samhagger/sv%20advert%20pics/Picture-086-small.jpg

[Geodude]

Forgot about this thread shots of mine as of yesterday
http://i866.photobucket.com/albums/ab227/geodude_album/southshields2.jpg
http://i866.photobucket.com/albums/ab227/geodude_album/southshields1.jpg

[Electro]

Mine now rebuilt and working.

http://i32.photobucket.com/albums/d2/ELECTROVW/photo.jpg

[maviczap]

Looking good, Electro

[Electro]

Cheers mav :)

[thebluelion]

Heres mine minus handrail now though
8699

[SV400Rob]

Looks awesome electro!

[Geodude]

Tidy bikes you got there electro n bluelion :)

[thebluelion]

Ty Geodude

[TamSV]

No new pics of the "Cafe Racer" but this is what my other SV currently looks like. :D

http://i918.photobucket.com/albums/ad23/tomSV/SV650/Picture013.jpg

[Whyte25]

Nice bike Geodude.... Love the naked curvies.. \m/

[dirtydog]

http://i181.photobucket.com/albums/x241/dirtydog88/P030110_15290001.jpg


Mine still looks like this, just a bit dustier now.

[Geodude]

Nice bike Geodude.... Love the naked curvies.. \m/
Cheers whyte25 nakeds \m/ :)

[mister c]

Mine now rebuilt and working.

http://i32.photobucket.com/albums/d2/ELECTROVW/photo.jpg
I'm liking very much :)

[Electro]

I'm liking very much :)

Cheers Col. Hope to get it MOT`d this week if i get time.

Are you going to do the buxton/ice cream run againm this year mate?

[stew]

mine

http://forums.sv650.org/attachment.php?attachmentid=8655&stc=1&thumb=1&d=1300029841 (http://forums.sv650.org/attachment.php?attachmentid=8655&d=1300029841)

[mister c]

Cheers Col. Hope to get it MOT`d this week if i get time.

Are you going to do the buxton/ice cream run againm this year mate?
I have been thinking about it over the weekend. I think it would be rude not to :)

Dont know when yet, but I would have thought June or July :)

[Ricerocket]

http://i674.photobucket.com/albums/vv109/ricerocketphotobucket/074.jpg

[thebluelion]

Very nice Stew loving the BlueFlame stubby

mine

http://forums.sv650.org/attachment.php?attachmentid=8655&stc=1&thumb=1&d=1300029841 (http://forums.sv650.org/attachment.php?attachmentid=8655&d=1300029841)

[hindle8907]

i need some lowers for my curvy :(

[radicalry00]

i need some lowers for my curvy :(
Me too. Can't justify the £200 to get some and then colour code them though :(

[stew]

thank you

me and the father in law stubby'd it.

i asked him to cut 1-2 inch off, he cut it in half :confused:
its v loud and pops alot.

ive got a set of lowers on ebay at the mo.
need a bit of a repair but less than £200

link
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250791650439&ssPageName=STRK:MESELX:IT

got some other bits in the for sale section

shamless plug :smt016

[Ricerocket]

Me too. Can't justify the £200 to get some and then colour code them though :(

I got a new set on ebay for 100 euro just before xmas! :D

[radicalry00]

I got a new set on ebay for 100 euro just before xmas! :D
Lucky git. I can't find any decent condition ones for less than £150 with fitting kit. And then I'd have to get them painted in Helios Red which seems quite a rare colour :mad:

Pic of the curvy today:

http://img.photobucket.com/albums/v666/radicalry00/2d263da2.jpg?t=1300886336

[Huwbee]

This is mine


8728

8729

Still need to sort tail tidy and stainlesss lines

[GMS]

Mine

http://i228.photobucket.com/albums/ee233/GMS650/DSC00822.jpg

[TamSV]

Nice bike there GMS - rattle canned black frames FTW.:p

I've had my eye out for some sort of grommets to cover the frame bolts, with no success. What are they - rubber or plastic? Any idea where to get them?

[GMS]

Nice bike there GMS - rattle canned black frames FTW.:p

I've had my eye out for some sort of grommets to cover the frame bolts, with no success. What are they - rubber or plastic? Any idea where to get them?

Hammerite rocks :thumbsup:
Plastic grommets were from some guy selling fasteners at the local auto jumble.

[DarrenSV650S]

That is smart GMS. I really like that 8)

Not sure if the rear plastics would look good the same colour as the tank or not. I think it works well with just the tank

[GMS]

That is smart GMS. I really like that 8)

Not sure if the rear plastics would look good the same colour as the tank or not. I think it works well with just the tank

Thanks Darren
The black rear plastics were originally only a temporary thing whilst I found a single seat unit, like Tams, but I really like the look and now any new unit will be getting the satin black treatment :cool:

[Dave20046]

Thanks Darren
The black rear plastics were originally only a temporary thing whilst I found a single seat unit, like Tams, but I really like the look and now any new unit will be getting the satin black treatment :cool:
liked it before, more so with the new look. like it with just the tank orange too - and the "orange flame" exhaust's a nice finishing touch.

Have you considered a bellypan or are you not a fan?

[BanannaMan]

A few pics from this past weekend.



http://www.allensmarathon.com/LIs4.jpg



http://www.allensmarathon.com/LIs6.jpg


http://www.allensmarathon.com/LIs7.jpg

[maviczap]

Looks nice and sunny Bill, like it is over here, just for a change

[Daveog]

Mine

http://i228.photobucket.com/albums/ee233/GMS650/DSC00822.jpg

Looks smart mate. Better weather than when I went there too!

[BanannaMan]

Looks nice and sunny Bill, like it is over here, just for a change




Just when I thought spring had arrived early. :rolleyes:
21 degrees and sunny last weekend. This Sunday the forecast is snow, sleet and freezing rain. :(

[maviczap]

Just when I thought spring had arrived early. :rolleyes:
21 degrees and sunny last weekend. This Sunday the forecast is snow, sleet and freezing rain. :(

Same Same, after a week of lovely weather, its back to seasonal norms :rolleyes:

[Grant66]

Not enough red ones

[thebluelion]

gajji there is only one curvy and thats a blue one :p in my unbias opinon

[thebluelion]

Ok just seen GMS curvy its the exception, very nice, very different, i like it :D

[maviczap]

gajji there is only one curvy and thats a blue one :p in my unbias opinon

Too many blue ones IMHO, common as muck ;)

Silver, then red, then black would be my unbiased opinion :p

[daveangel]

http://i1131.photobucket.com/albums/m549/daveangel20/2010_0465MayDayRun2010_0002.jpg




Not silver, red or black but how about a yellow curvy to balance the thread?:rolleyes:

[maviczap]

http://i1131.photobucket.com/albums/m549/daveangel20/2010_0465MayDayRun2010_0002.jpg




Not silver, red or black but how about a yellow curvy to balance the thread?:rolleyes:

Thats a lovely shiny downpipe :smt112

I saw a yellow curvy like this on the A2 on Sunday, was it you DA

[husky03]

thats clean-mine used to be like that-used to

[daveangel]

Thanks maviscap & husky03:D it goes away for the winter in November thru March-ish, it's seen plenty of rain over the years but no rock salt. I'll have to join the shiny downpipe club on here;). I wasn't on the A2 last Sunday unfortunately! Having got it ready for this year I managed to tweak a muscle in my back so had to get my fix from the WSB boys at Donnington Sunday, back to near normal now.

[daveyrach]

8764
:p

[maviczap]

8764
:p

Your downpipe needs to be as shiney as Dave Angels, otherwise Dizzy is gonna spank ya :D

[YellowMonkeyBoy]

Just sat here and looked through 19 pages of images and its just made me want more pretty things for my Curvy, definately looking for a tail tidy just seems to finish the back end perfectly. Though bless her she doesn't look this clean anymore, damn Devon!

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/200246_10150476153295193_835370192_18040031_819510 3_n.jpg

[markc123]

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/216609_10150555698285343_500845342_18072012_714549 3_n.jpg

[leebex]

gave the sv a much needed clean so thought Id post up a pic, its done 30k now.

Ive got a few jobs to finish, the fairing lowers and the under seat infills are off being smoothed and cleaned up and will be done in the proper yellow. I also must get round to making the small infills for each side of the pointy light.

http://i97.photobucket.com/albums/l210/leebex/035.jpg

The wood block is just to hold the bike upright a bit for cleaning.

Lee

[maviczap]

Looks cracking Lee

[leebex]

thanks mate, although really need a high level exhaust, that pic just looks odd :smt048:smt048

[bigchris]

gave the sv a much needed clean so thought Id post up a pic, its done 30k now.

Ive got a few jobs to finish, the fairing lowers and the under seat infills are off being smoothed and cleaned up and will be done in the proper yellow. I also must get round to making the small infills for each side of the pointy light.

http://i97.photobucket.com/albums/l210/leebex/035.jpg

The wood block is just to hold the bike upright a bit for cleaning.

Lee

Looking sweet, was the pointy brake light hard to fit?
Did you have to modify wiring and brackets ect?
It's something I may look into doing!!

[leebex]

Bigchris, it was actually fairly easy, although does look a tad bodgy i suppose,especiallyif you see the pics without the rear seat, so it could certainly be improved!!:D

The pointy light has 4 mount points, and sits where the curvy light mounts, with that plate having to be cut off the subframe. The pointy light mounts on the under side of the subframe, using the same tapped holes for the pillion seat rubber spacers.

I made up some very simple brackets from stainless and for the wiring I bought a wiring plug and crimps off ebay for pennies.

You would need to make up an undertray as the curvy one continues way past where the light is now (i used the one zunkus has posted elsewhere, although it needs extra part cut out) and you need to make a tail tidy to mount your plate and indicators.

I can email you my pictures and copies of templates used, so you can see if its worth the agro for you, and im sure it can be much improved on, as my abilities are a bit limited :p:p

The underseat are is reduced, but then I never used it anyway, and making the infills for each side of the light is proving a pain due to all the angles, but Im getting there with card and plastic templates.

Hope that helps.;)

Lee

[nobby]

http://i675.photobucket.com/albums/vv117/john71/snow/bdbd221e-1.jpg

http://i675.photobucket.com/albums/vv117/john71/snow/IMG_0560.jpg

My curvy with my mates K3 up at Wrynose the other week :p

[bigchris]

Bigchris, it was actually fairly easy, although does look a tad bodgy i suppose,especiallyif you see the pics without the rear seat, so it could certainly be improved!!:D

The pointy light has 4 mount points, and sits where the curvy light mounts, with that plate having to be cut off the subframe. The pointy light mounts on the under side of the subframe, using the same tapped holes for the pillion seat rubber spacers.

I made up some very simple brackets from stainless and for the wiring I bought a wiring plug and crimps off ebay for pennies.

You would need to make up an undertray as the curvy one continues way past where the light is now (i used the one zunkus has posted elsewhere, although it needs extra part cut out) and you need to make a tail tidy to mount your plate and indicators.

I can email you my pictures and copies of templates used, so you can see if its worth the agro for you, and im sure it can be much improved on, as my abilities are a bit limited :p:p

The underseat are is reduced, but then I never used it anyway, and making the infills for each side of the light is proving a pain due to all the angles, but Im getting there with card and plastic templates.

Hope that helps.;)

Lee

Yea it does matey, the templates and pictures would be really handy if it's not too much trouble? My emails christopher_dickinson4@msn.com
I think the pointy light looks smart on a curvy, may give it a go :-)

[Geodude]

http://i675.photobucket.com/albums/vv117/john71/snow/bdbd221e-1.jpg

http://i675.photobucket.com/albums/vv117/john71/snow/IMG_0560.jpg

My curvy with my mates K3 up at Wrynose the other week :p

Nice looking naked nobby :D

[markc123]

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/215751_10150561780665343_500845342_18141021_222911 2_n.jpg

Lower fairings fitted now, bit scratched up but a bargain price :-)

Thinking this winter for some cosmetic tidying up. Over 22k and still going strong!

[nobby]

Nice looking naked nobby :D

Thanks :D

[Daveog]

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/215751_10150561780665343_500845342_18141021_222911 2_n.jpg

Lower fairings fitted now, bit scratched up but a bargain price :-)

Thinking this winter for some cosmetic tidying up. Over 22k and still going strong!

Lovely - looking smart! I'm only 1k behind you, but mines not looking quite so tidy at the moment - needs a little TLC.

[leebex]

Seeing some really nice curvies here both nakeds and faired :cool::cool:

Bigchris, sent you an email with details and links ;)