 |
 |
| SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
 |
|
|
Thread Tools |
05-02-08, 03:56 PM
|
#1 |
|
Guest
Posts: n/a
|
pegs
My left hand side foot peg has become loose including gear lever, how do i tighten it? Also what tools do i need?
|
|
|
05-02-08, 03:58 PM
|
#2 |
|
Knob faced knobster
Mega Poster
Join Date: Jan 2005
Location: Haslemere
Posts: 5,422
|
Re: pegs
You'll probably need to take the whole assembly off incuding the hanger should be just 2 allen bolts on then tighten up the footpeg with another allen key
__________________
2011 Speed Triple 1050 |
|
|
|
05-02-08, 04:01 PM
|
#3 |
|
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
Re: pegs
IIRC it's a 6mm one to take the hangar off, and an 8mm one behind it to tighten the peg.
Expect the 6's to be a bit of a pig though.
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
|
|
|
|
05-02-08, 04:08 PM
|
#4 |
|
Guest
Posts: n/a
|
Re: pegs
The 8 needs to be done up tight so that you find it difficult to get back off
 Theyre sockets heads on the CBR  lol.
|
|
|
|
05-02-08, 10:57 PM
|
#5 |
|
Guest
Posts: n/a
|
Re: pegs
You'll need to undo the gear linkage too. One of the nuts is an opposite thread, so watch out. Good time to re lube the gear lever where it sits on the shaft.
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Highway Pegs? | SpacemanSpiff | Ancillaries | 10 | 10-01-09 09:24 PM |
| Pegs Down - good or bad? | Blue_SV650S | Bikes - Talk & Issues | 41 | 22-09-08 11:03 AM |
| Pegs too sticky? | chasey | Bikes - Talk & Issues | 6 | 08-06-08 12:16 AM |
| Pegs Down | G | Bikes - Talk & Issues | 6 | 06-06-07 11:04 AM |
| :: Rear Pegs! :: | Steve_God | Stuff Wanted | 2 | 27-06-06 01:05 PM |
