WHAT HAVE I DONE PART 2 !!!!

ok so most of you know i buggered up my clutch trying to do burnouts, so i thought i would show the list of what i did let this me a warning to all!!!!
leave the stunt's to the pro's!!!!!!!!!!!!!!!!!!!!
x3 hours labour £135.00
filter assy, engine oil £9.06
cl cover gasket £7.36
clutch cover sleve hub £30.15
.spring, clutch £19.14
.plate, clutch drive no £12.70
.plate, clutch drive £60.54
.clutch driven plate £37.56
plate clutch pressure £23.61
seat, wave washer £4.27
washer, clutch plate wa £7.80
bolt (6x30) £5.94
nut £1.26
washer £3.27
clutch push rod £0.98
.clutch push rod £7.65
reod bardsley £6.35
washer £1.53
.roller bearing £4.25
.silkolene comp4 perlitre wkshop x2.50 £12.80
silkolene coolant 1litre wkshop £7.32

TOTAL COST TO ME £475.54 inc vat

never will i do burn outs or wheelie's again i swear!!!! really i do

there were bits of my old clutch floating in my oil
and it was all blue because of the over heating!!!!!!

£475.54 inc vat

Expensive lesson learned

You shouldn't need much clutch when doing burnout... Just let it out whilst increasing revs then let go of the clutch completely... Don't slip the clutch at all as you will, as you've found out, f**k the clutch up You just need to slip it a bit to get the wheel spinning and thats it.. should take a couple of seconds to get it spinning too...

Originally Posted by Yams

You shouldn't need much clutch when doing burnout... Just let it out whilst increasing revs then let go of the clutch completely... Don't slip the clutch at all as you will, as you've found out, f**k the clutch up You just need to slip it a bit to get the wheel spinning and thats it.. should take a couple of seconds to get it spinning too...

yeah not keep bringing it in and letting it out like i did!!!!!
just glad my baby is all better now i missed her and she was only gone 2 days!!

[quote="hall13uk"]
bolt (6x30) £5.94
nut £1.26
washer £3.27
quote]

dude you was ripped off

[Spiderman]

damn thats one expensive burnout innit

I think they took the pee with their prices for Oil and coolant tho.
but its not like it would have made a huge diffrence anyway.

[Spiderman]

[quote="madmartyn"]

Originally Posted by hall13uk

bolt (6x30) £5.94
nut £1.26
washer £3.27
quote]

dude you was ripped off

I also saw those and thought but gave it the benefit of the doubt in case they were very special nuts bolts and washers.
For £3.27 i'd want a pure gold one or one as big as my head to be honest.

Last time i went to buy one washer from the plumbing shop he asked if thats al i needed and when i said yeh.... he let me have it. So how cheap should a washer be then????

i had a customer come in today all he wanted was 6 m8 a2 stainless washers and 6 m8 a2 stainless single coil spring washers let him have them aint worth the time writing out a reciept for them

[quote="madmartyn"]

Originally Posted by hall13uk

bolt (6x30) £5.94
nut £1.26
washer £3.27
quote]

dude you was ripped off

what can i say offical suzuki parts only on my bike nothing else good enough for my girl!!!!!

[quote="hall13uk"]

Originally Posted by madmartyn

what can i say offical suzuki parts only on my bike nothing else good enough for my girl!!!!!

what about if i get ya some from work put them in a suzuki stamped bag and put on a part number