Carb syncing - SV650.org

13-02-06, 06:39 PM

Just put the beast back together after a failed attempt at syncing the carbs, all adjustment was taken up by the pins moving around in the link bar to the front carb (if you know the bit i'm talking about)

Luckily i've got a spare set of carbs form ages ago which i knew would come in handy one day

P.S. I was also thinking of doing the mod to ease syncing which involves adding tubes, but IMHO i didn't have a problem getting to the front vac nipple

13-02-06, 06:59 PM

I left 6" or so of vacuum tube connected to the front and a shorter bit from a T-piece on the rear. They're sealed with a suitable bolt screwed up the pipe when not needed.

northwind · 13-02-06, 09:01 PM

definately worth doing the wee tube extension thang, IMO.

13-02-06, 06:39 PM	#1
svrash Guest Posts: n/a	Carb syncing Just put the beast back together after a failed attempt at syncing the carbs, all adjustment was taken up by the pins moving around in the link bar to the front carb (if you know the bit i'm talking about) Luckily i've got a spare set of carbs form ages ago which i knew would come in handy one day P.S. I was also thinking of doing the mod to ease syncing which involves adding tubes, but IMHO i didn't have a problem getting to the front vac nipple

13-02-06, 09:01 PM	#3
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,083	definately worth doing the wee tube extension thang, IMO. __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pipes going to carb to carb	sv650nutter149	SV Talk, Tuning & Tweaking	3	07-09-08 10:16 PM
What Carb Balancer	thedonal	Bikes - Talk & Issues	13	21-08-08 05:54 PM
Carb balancing	Taipan	SV Talk, Tuning & Tweaking	3	13-06-07 09:24 AM
HELP - Im in the middle of syncing my carbs....	ash	SV Talk, Tuning & Tweaking	9	03-08-06 11:28 AM
Carb syncing at 4000RPM not Idle!?..	kciN	SV Talk, Tuning & Tweaking	19	11-05-06 02:08 AM

13-02-06, 06:59 PM	#2
chazzyb Guest Posts: n/a	I left 6" or so of vacuum tube connected to the front and a shorter bit from a T-piece on the rear. They're sealed with a suitable bolt screwed up the pipe when not needed.