SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Member
Join Date: Mar 2007
Location: Basildon, Essex
Posts: 785
|
![]()
Hi All
I've decided to opt for the Hyperpros after trawling the archives and reading up on the different options. But, looking through the archives it seems that a few people have had to cut the spacers to get the springs to fit, whilst some haven't? My understanding is hyperpros are normally a drop in replacment? In one post it seems that JHS Racing send out Hyperpro springs which are for the later model and need the spacers cutting to fit? Is this where the confusion arises? If so why do they send out the later springs and not the correct springs for the earlier model? ![]() I'd rather have the correct springs that keep the spacers intact in case I ever wanted to revert to oem set up at sale time etc. Or have I got this all wrong? ![]() Last edited by Taipan; 18-04-07 at 09:26 AM. |
![]() |
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
![]()
JHS will send you out the spacers you need for your bike. tell them what you need & they'll send them
in any case, spacers are just lengths of steel tube, nothing more than that. you could probably get OEM replacements for a fiver |
![]() |
![]() |
#3 | |
Member
Join Date: Mar 2007
Location: Basildon, Essex
Posts: 785
|
![]() Quote:
![]() Last edited by Taipan; 11-05-07 at 12:24 PM. |
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
MOT question | x Silver x | SV Talk, Tuning & Tweaking | 10 | 20-02-09 09:37 PM |
So much for fitting my hyperpros this weekend. | Taipan | SV Talk, Tuning & Tweaking | 29 | 10-06-07 12:01 AM |
R&G bar end question | lukemillar | SV Talk, Tuning & Tweaking | 1 | 21-03-06 10:27 AM |
question about ACF-50 | mark | SV Talk, Tuning & Tweaking | 1 | 04-01-06 12:42 AM |