HID Fitting? - Page 3 - SV650.org

19-04-14, 04:40 PM

Damn. As in a direct supply from the battery with a relay from the stock plugs to let the relay know when to turn on the hids. Crap. Where am I gonna get one of those in the UK?

Sent using a device that allows me to coalesce my thoughts with radio frequency waves and transmit them over long distances.

NTECUK · 19-04-14, 04:41 PM

Also inside the control box there will be either two diodes or a changeover relays that swiches on the relay that powers the ballast

NTECUK · 19-04-14, 04:50 PM

Some kits don't have all the kit
It might be like this
http://www.google.co.uk/url?sa=t&sou...65058239,d.ZGU
You have to buy that relay extra

19-04-14, 05:38 PM

Is this what I need? http://www.ebay.co.uk/itm/REPLACEMEN...-/221270628527

NTECUK · 19-04-14, 06:41 PM

If you are sure it's dead then yes.
Have you checked the +Ve and grounds. This includes the original on the H4 connector
As they are very important

19-04-14, 06:57 PM

I don't have a voltmeter. Shall I just try with standard bulbs?

Sent using a device that allows me to coalesce my thoughts with radio frequency waves and transmit them over long distances.

NTECUK · 19-04-14, 07:12 PM

Yes if you have normal operation. Then the H4 plug and voltage is Ok.

NTECUK · 19-04-14, 07:13 PM

A half decent volt meter is worth its waight in gold.
A led test lamp are ok to a point but need a load in circuit

19-04-14, 07:27 PM

If it works well then I just need to buy one of those relays right?

Sent using a device that allows me to coalesce my thoughts with radio frequency waves and transmit them over long distances.

NTECUK · 19-04-14, 09:49 PM

You can get both bulbs (Hid) to work yes?
All box does is,
1, power up the ballasts. As your one has only the one box (no dip /main switching feed relay separate)
If the ballast Is Ok. The bulbs will light in one of the positions Dip or main.
2 the other parts move the bulb or mask on the hid bulb for main and dip.
The bi xenon I fitted to my Juke had a separate fused supply to power the ballast. Yours should have this as hids direct kits are better than the £1.kits you find on ebay.
If the fuse or the connections from the battery are no good they can power the ballast from the original H4 connector by back feeding from the sensor wire but only one (dip position or main) position will power the hid ballast /bulb

So you still need to check out this.

19-04-14, 04:40 PM	#21
Entropy Guest Posts: n/a	Re: HID Fitting? Damn. As in a direct supply from the battery with a relay from the stock plugs to let the relay know when to turn on the hids. Crap. Where am I gonna get one of those in the UK? Sent using a device that allows me to coalesce my thoughts with radio frequency waves and transmit them over long distances.

19-04-14, 04:41 PM	#22
NTECUK Member Mega Poster Join Date: Apr 2011 Location: essex Posts: 5,314	Re: HID Fitting? Also inside the control box there will be either two diodes or a changeover relays that swiches on the relay that powers the ballast __________________ Raisin cookies that look like chocolate chip cookies are the reason I have trust issues.

19-04-14, 04:50 PM	#23
NTECUK Member Mega Poster Join Date: Apr 2011 Location: essex Posts: 5,314	Re: HID Fitting? Some kits don't have all the kit It might be like this http://www.google.co.uk/url?sa=t&sou...65058239,d.ZGU You have to buy that relay extra __________________ Raisin cookies that look like chocolate chip cookies are the reason I have trust issues.

19-04-14, 05:38 PM	#24
Entropy Guest Posts: n/a	Re: HID Fitting? Is this what I need? http://www.ebay.co.uk/itm/REPLACEMEN...-/221270628527

19-04-14, 06:41 PM	#25
NTECUK Member Mega Poster Join Date: Apr 2011 Location: essex Posts: 5,314	Re: HID Fitting? If you are sure it's dead then yes. Have you checked the +Ve and grounds. This includes the original on the H4 connector As they are very important __________________ Raisin cookies that look like chocolate chip cookies are the reason I have trust issues.

19-04-14, 06:57 PM	#26
Entropy Guest Posts: n/a	Re: HID Fitting? I don't have a voltmeter. Shall I just try with standard bulbs? Sent using a device that allows me to coalesce my thoughts with radio frequency waves and transmit them over long distances.

19-04-14, 07:12 PM	#27
NTECUK Member Mega Poster Join Date: Apr 2011 Location: essex Posts: 5,314	Re: HID Fitting? Yes if you have normal operation. Then the H4 plug and voltage is Ok. __________________ Raisin cookies that look like chocolate chip cookies are the reason I have trust issues.

19-04-14, 07:13 PM	#28
NTECUK Member Mega Poster Join Date: Apr 2011 Location: essex Posts: 5,314	Re: HID Fitting? A half decent volt meter is worth its waight in gold. A led test lamp are ok to a point but need a load in circuit __________________ Raisin cookies that look like chocolate chip cookies are the reason I have trust issues. Last edited by NTECUK; 19-04-14 at 07:14 PM.

19-04-14, 07:27 PM	#29
Entropy Guest Posts: n/a	Re: HID Fitting? If it works well then I just need to buy one of those relays right? Sent using a device that allows me to coalesce my thoughts with radio frequency waves and transmit them over long distances.

19-04-14, 09:49 PM	#30
NTECUK Member Mega Poster Join Date: Apr 2011 Location: essex Posts: 5,314	Re: HID Fitting? You can get both bulbs (Hid) to work yes? All box does is, 1, power up the ballasts. As your one has only the one box (no dip /main switching feed relay separate) If the ballast Is Ok. The bulbs will light in one of the positions Dip or main. 2 the other parts move the bulb or mask on the hid bulb for main and dip. The bi xenon I fitted to my Juke had a separate fused supply to power the ballast. Yours should have this as hids direct kits are better than the £1.kits you find on ebay. If the fuse or the connections from the battery are no good they can power the ballast from the original H4 connector by back feeding from the sensor wire but only one (dip position or main) position will power the hid ballast /bulb So you still need to check out this. __________________ Raisin cookies that look like chocolate chip cookies are the reason I have trust issues. Last edited by NTECUK; 19-04-14 at 09:52 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fitting an end can, how? Yet again.	Chris199	SV Talk, Tuning & Tweaking	12	22-06-12 10:12 PM
Been fitting ....	Teejayexc	SV Talk, Tuning & Tweaking	9	15-03-11 09:53 AM
R&G Fitting	cb5_keith	SV Talk, Tuning & Tweaking	14	25-06-08 11:53 AM
DIY Can Fitting	Jackhammer	SV Talk, Tuning & Tweaking	14	15-02-08 01:12 PM
Fitting CCC	cuffy	SV Talk, Tuning & Tweaking	57	27-01-06 09:36 PM