SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
Hi all,
I had a bit of an off and bent the gear lever on my 99 SV. I bought a new one but then the job of replacing it didnt look as easy as I first thought. Does someone have a guide of some instructions they could give me to switch it over. Thanks in advance. Crammy |
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
![]()
Remove the complete rear set from the left side, then remove the bolt behind which holds the foot peg on and your pretty much done!! Give it a good grease when you put it all back together and make sure you tighten the bolts to the correct spec!
Found these in the interweb.... ![]() ![]() ![]() |
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
![]()
its a pretty easy job 2 do as DD says remove the hole hanger then just un-do the bolt and your basically done apart from putting it back 2 gather lol.
![]() |
![]() |
![]() |
#4 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
![]()
Moly grease or other dry lube is good
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
![]() |
![]() |
![]() |
Thread Tools | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gear Shift Rod bent - Gear Changing problem | Thaleshwar | SV Talk, Tuning & Tweaking | 13 | 05-06-10 06:28 PM |
Changing gear lever and rod | Dave20046 | SV Talk, Tuning & Tweaking | 12 | 02-01-09 11:57 AM |
How to straighten a bent gear lever? (heat it up first? or what?), ---possible fix or recipe for snapped of gear lever :-) | martin_SV | SV Talk, Tuning & Tweaking | 10 | 30-07-08 08:40 PM |
Gear lever changing | Renton | SV Talk, Tuning & Tweaking | 3 | 11-11-07 04:18 PM |
K5 Pointy 650S right hand wing mirror, gear lever and clutch lever. | Bayside GTR | Stuff Wanted | 0 | 29-10-07 11:24 PM |