Rear brake pins - where from online? - SV650.org

26-01-10, 08:23 PM

hello all

in the middle of doing the rear caliper on the bike but need new rear pins as i cant get the old ones out.

cheers

Ricky

2001 sv650sk1 curvy

maviczap · 26-01-10, 08:24 PM

Wemoto

fastdruid · 26-01-10, 08:26 PM

Or tasty nuts I believe do titanium ones[1].

Druid

[1] Although I believe Ti is even worse for galling than Al, doesn't rust though.

5hort5 · 26-01-10, 08:44 PM

I sheared one off trying to get it out and then tried to drill it and missed, end of rear caliper lol, before buying the new ones just see if you can get them out without damaging other things first.

26-01-10, 08:49 PM

well 5hort5 is going to link you to his brake caliper thread so you know what NOT to do in this situation!

26-01-10, 08:57 PM

haha yer read that thread, i have snapped both pins, one on the tip and that one come out in a vise the other one snappe in the vise with about 4mm on the end

ended up drilling a small hole in the back and hammer it out

so deffo need 2 new pins now pmsl

5hort5 · 26-01-10, 08:59 PM

Here you go:

http://forums.sv650.org/showthread.php?t=145226

me and my muppet moment (one of just a few recently tbh)

5hort5 · 26-01-10, 09:03 PM

Yer sounds about the same as mine but I thought it would be a good idea to drill it from the front, bad idea now looking back on it, I should have measured it on the back and drilled there as the metal is softer. Having said that I'm getting a fully serviced set from husky for 25 quid and new pins will cost you 8.78 from wemoto

26-01-10, 09:07 PM

yer you are right funny you say that tho as thats the same pin that snapped at that size lol

any one priced up the pins at a local dealer??

5hort5 · 26-01-10, 09:11 PM

So are you going to clean up the good pin and reuse it, if so I have another - good (in need of a clean and rub down) pin, the one that didn't brake you can have if you just want a free option

26-01-10, 08:23 PM	#1
ricky Guest Posts: n/a	Rear brake pins - where from online? hello all in the middle of doing the rear caliper on the bike but need new rear pins as i cant get the old ones out. cheers Ricky 2001 sv650sk1 curvy

26-01-10, 08:24 PM	#2
maviczap Member Mega Poster Join Date: Mar 2007 Posts: 9,097	Re: rear brake pins?? where from online?? Wemoto __________________ We're riding out tonight to case the promised land Make everyday count RIP Reeder - Jolly Green Giant and comedy genius

26-01-10, 08:26 PM	#3
fastdruid Member Mega Poster Join Date: Jul 2003 Location: W Mids Posts: 2,037	Re: rear brake pins?? where from online?? Or tasty nuts I believe do titanium ones[1]. Druid [1] Although I believe Ti is even worse for galling than Al, doesn't rust though. __________________ '00 SV700S - '94 RVF400R - '97 RVF400R - '88 VFR750F

26-01-10, 08:44 PM	#4
5hort5 Member Join Date: May 2006 Location: Newcastle Posts: 872	Re: rear brake pins?? where from online?? I sheared one off trying to get it out and then tried to drill it and missed, end of rear caliper lol, before buying the new ones just see if you can get them out without damaging other things first.

26-01-10, 08:49 PM	#5
sunshine Guest Posts: n/a	Re: rear brake pins?? where from online?? well 5hort5 is going to link you to his brake caliper thread so you know what NOT to do in this situation!

26-01-10, 08:57 PM	#6
ricky Guest Posts: n/a	Re: rear brake pins?? where from online?? haha yer read that thread, i have snapped both pins, one on the tip and that one come out in a vise the other one snappe in the vise with about 4mm on the end ended up drilling a small hole in the back and hammer it out so deffo need 2 new pins now pmsl

26-01-10, 08:59 PM	#7
5hort5 Member Join Date: May 2006 Location: Newcastle Posts: 872	Re: rear brake pins?? where from online?? Here you go: http://forums.sv650.org/showthread.php?t=145226 me and my muppet moment (one of just a few recently tbh)

26-01-10, 09:03 PM	#8
5hort5 Member Join Date: May 2006 Location: Newcastle Posts: 872	Re: rear brake pins?? where from online?? Yer sounds about the same as mine but I thought it would be a good idea to drill it from the front, bad idea now looking back on it, I should have measured it on the back and drilled there as the metal is softer. Having said that I'm getting a fully serviced set from husky for 25 quid and new pins will cost you 8.78 from wemoto

26-01-10, 09:07 PM	#9
ricky Guest Posts: n/a	Re: rear brake pins?? where from online?? yer you are right funny you say that tho as thats the same pin that snapped at that size lol any one priced up the pins at a local dealer??

26-01-10, 09:11 PM	#10
5hort5 Member Join Date: May 2006 Location: Newcastle Posts: 872	Re: rear brake pins?? where from online?? So are you going to clean up the good pin and reuse it, if so I have another - good (in need of a clean and rub down) pin, the one that didn't brake you can have if you just want a free option

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
rear brake caliper pins	mattglavin	SV Talk, Tuning & Tweaking	19	23-04-09 07:31 AM
Rear brake pad retaining pins.	mikebrooman	SV Talk, Tuning & Tweaking	8	23-02-09 08:03 PM
rear brake pins siezed - what now	ejohnh	SV Talk, Tuning & Tweaking	31	15-12-08 01:16 PM
Rear brake pins	Viney	Stuff Wanted	4	29-08-06 07:29 PM
rear brake pins	syphonus	SV Talk, Tuning & Tweaking	9	11-10-04 09:40 PM