Replacing the Cadburys float bowl screws. - SV650.org

Taipan · 16-02-10, 01:19 PM

Would these be the right allen bolts?

http://cgi.ebay.co.uk/M5-x-10-Stainl...item563249a336

yorkie_chris · 16-02-10, 01:28 PM

Measure the ones that came out. I think I used M5x15 but could be wrong. Measure them.

Taipan · 16-02-10, 01:32 PM

Quote:

Originally Posted by yorkie_chris

Measure the ones that came out. I think I used M5x15 but could be wrong. Measure them.

I ideally wanted them on hand to replace once I had the carbs out rather than then order them up IYSWIM? I'm long overdue a visit to the local fastners. Perhaps its time to go and get a fresh selection of stainless goodies.

yorkie_chris · 16-02-10, 01:33 PM

ok I'll go measure some for you

Taipan · 16-02-10, 01:37 PM

Quote:

Originally Posted by yorkie_chris

ok I'll go measure some for you

Top man!

yorkie_chris · 16-02-10, 01:39 PM

so long as you're not in a rush

Taipan · 16-02-10, 01:44 PM

Quote:

Originally Posted by yorkie_chris

so long as you're not in a rush

No mate not really. Thinking about it, I'm round my in-laws tomorrow nighty and my spare carbs are round there. So if yours aren't to hand and no one knows I can find out then anyway.

Taipan · 17-02-10, 07:41 PM

For the benefit of the archives, M5 x 10mm.

yorkie_chris · 17-02-10, 07:45 PM

Beat me to it, I'd even dug a set of carbs out of the spares pile

Taipan · 17-02-10, 08:14 PM

Quote:

Originally Posted by yorkie_chris

Beat me to it, I'd even dug a set of carbs out of the spares pile

Its appreciated anyway.

16-02-10, 01:19 PM	#1
Taipan Member Join Date: Mar 2007 Location: Basildon, Essex Posts: 785	Replacing the Cadburys float bowl screws. Would these be the right allen bolts? http://cgi.ebay.co.uk/M5-x-10-Stainl...item563249a336

16-02-10, 01:28 PM	#2
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: Replacing the Cadburys float bowl screws.. Measure the ones that came out. I think I used M5x15 but could be wrong. Measure them. __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

16-02-10, 01:33 PM	#4
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: Replacing the Cadburys float bowl screws.. ok I'll go measure some for you __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

16-02-10, 01:39 PM	#6
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: Replacing the Cadburys float bowl screws.. so long as you're not in a rush __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

17-02-10, 07:41 PM	#8
Taipan Member Join Date: Mar 2007 Location: Basildon, Essex Posts: 785	Re: Replacing the Cadburys float bowl screws. For the benefit of the archives, M5 x 10mm. Last edited by Taipan; 20-02-10 at 12:22 PM.

17-02-10, 07:45 PM	#9
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: Replacing the Cadburys float bowl screws. Beat me to it, I'd even dug a set of carbs out of the spares pile __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to remove mangled float bowl screws?	Taipan	SV Talk, Tuning & Tweaking	4	25-11-09 12:28 PM
Broken carb float bowl hole - argh!	skyline	SV Talk, Tuning & Tweaking	7	08-07-09 02:00 PM
New favourite advert - cadburys dairy milk	MiniMatt	Idle Banter	6	13-09-07 10:03 AM
Cadburys Double Decker	tricky	Idle Banter	33	03-02-07 10:21 AM
Float height?	Jase22	SV Talk, Tuning & Tweaking	6	04-01-07 01:42 PM