exhaust stud - SV650.org

dirtydog · 14-02-06, 12:43 PM

How the hek do you get a nackered exhaust stud out?

dirtydog · 14-02-06, 12:51 PM

yeah part of it is threadless now

northwind · 14-02-06, 12:51 PM

If it's not snapped off, you can use a stud puller. Or sometimes just thread 2 M8 nuts on, tighten them against each other then back it off with the inside bolt. If you need a stud puller drop me a PM, mine are cheap rubbish but they do work

If it's snapped off, you may be in what I like to think of as A World Of Pain

timwilky · 14-02-06, 12:51 PM

My studs came out when I attempted to undo the nuts.

Normally to remove a stud, simply tighten two nuts against each other and then use a spanner on the inside nut. I have a fancy knurled contraption that grips against the plain part of studs. Used it ok on large cylinder head studs. but the torque would snap corroded m8 type studs

dirtydog · 14-02-06, 01:04 PM

tried using 2 nuts together, ended up stripping half the thread off

cheers northy can i borrow it?

northwind · 14-02-06, 01:05 PM

No worries. But it's behind all the drapes for the spray so I'll not be able to get to it tonight... PM me your address, I'll have lost it again

14-02-06, 02:18 PM

Quote:

Originally Posted by dirtydog

How the hek do you get an exhausted stud out?

Quote:

Originally Posted by northwind

you need a stud puller. I like to think of it as A World Of Pain

Oh... it's not the thread I thought it might be.

(Reminds herself why she never comes into the tuning and tweaking board. It's too complicated and she doesn't understand <eyes glaze>).

She shuffles away.

14-02-06, 02:28 PM

Quote:

Originally Posted by Cazza

Oh... it's not the thread I thought it might be.

Mention the word stud and Cazza is there.

dirtydog · 14-02-06, 02:34 PM

Quote:

Originally Posted by Scoobs

Quote:

Originally Posted by Cazza

Oh... it's not the thread I thought it might be.

Mention the word stud and Cazza is there.

So what's your excuse then scoobs?

jambo · 14-02-06, 02:46 PM

He's lurking here waiting for Cazza

14-02-06, 12:43 PM	#1
dirtydog Knob faced knobster Mega Poster Join Date: Jan 2005 Location: Haslemere Posts: 5,422	exhaust stud How the hek do you get a nackered exhaust stud out? __________________ 2011 Speed Triple 1050

14-02-06, 12:51 PM	#2
dirtydog Knob faced knobster Mega Poster Join Date: Jan 2005 Location: Haslemere Posts: 5,422	yeah part of it is threadless now __________________ 2011 Speed Triple 1050

14-02-06, 12:51 PM	#3
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,083	If it's not snapped off, you can use a stud puller. Or sometimes just thread 2 M8 nuts on, tighten them against each other then back it off with the inside bolt. If you need a stud puller drop me a PM, mine are cheap rubbish but they do work If it's snapped off, you may be in what I like to think of as A World Of Pain __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

14-02-06, 12:51 PM	#4
timwilky Member Mega Poster Join Date: Mar 2004 Location: Not in Yorkshire. (Thank God) Posts: 4,116	My studs came out when I attempted to undo the nuts. Normally to remove a stud, simply tighten two nuts against each other and then use a spanner on the inside nut. I have a fancy knurled contraption that grips against the plain part of studs. Used it ok on large cylinder head studs. but the torque would snap corroded m8 type studs __________________ Not Grumpy, opinionated.

14-02-06, 01:04 PM	#5
dirtydog Knob faced knobster Mega Poster Join Date: Jan 2005 Location: Haslemere Posts: 5,422	tried using 2 nuts together, ended up stripping half the thread off cheers northy can i borrow it? __________________ 2011 Speed Triple 1050

14-02-06, 01:05 PM	#6
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,083	No worries. But it's behind all the drapes for the spray so I'll not be able to get to it tonight... PM me your address, I'll have lost it again __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

14-02-06, 02:46 PM	#10
jambo Member Mega Poster Join Date: Aug 2003 Location: Croydonia Posts: 5,376	He's lurking here waiting for Cazza __________________ Modern motorcycles are bloody brilliant, enjoy it while we can

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
99 (curvy) Exhaust Stud Things	vardypeeps	SV Talk, Tuning & Tweaking	9	31-10-08 08:59 PM
Farrrk Snapped Exhaust Header Stud Bolt	21QUEST	SV Talk, Tuning & Tweaking	25	02-08-08 09:40 PM
Snapped Exhaust stud!	spacehog	SV Talk, Tuning & Tweaking	4	22-05-08 08:21 PM
Removing Exhaust a Stud	Grinch	SV Talk, Tuning & Tweaking	50	28-02-08 11:08 PM
At Stud on Ebay :(	21QUEST	Idle Banter	5	23-01-07 01:23 PM