Are k3 and k5 rear ends the same? - SV650.org

23-12-06, 09:55 AM

my SV1000 is a k5 and i have seen an undertray off a k3 sv1000, im just wondering if the rear ends/undertrays are the same so i dont buy in error
Thanks
Andy

mattSV · 23-12-06, 10:16 AM

Andy - i am 99% certain the K3/K5 are the same on the SV1000.

I have got a K3 SV1000 with a hamicad fitted so if you want me to take any pictures/measurements then happy to help.

Matt

23-12-06, 10:28 AM

cheers for the reply matey, where did you get your hamicad from? are they the only ones worth bothering with?

mattSV · 23-12-06, 11:17 AM

Get you hamicad from http://www.hamicad.co.uk/SV_Fender.html

There are others out there, but I have been very happy with my hamicad. Early hamicads had a few problems with the design however they changed them and sent out free replacements to anyone who had problems. Mine has been on for a good couple of years now I think.

The good thing about the hamicad is that it retains the stock number plate light - I then made a bracket for the reflector, and cut down the standard plate - see below:-

23-12-06, 09:55 AM	#1
Coddy_SV1000Z Guest Posts: n/a	Are k3 and k5 rear ends the same? my SV1000 is a k5 and i have seen an undertray off a k3 sv1000, im just wondering if the rear ends/undertrays are the same so i dont buy in error Thanks Andy

23-12-06, 10:16 AM	#2
mattSV Member Mega Poster Join Date: Jul 2003 Location: Darn sarf, innit Posts: 2,025	Andy - i am 99% certain the K3/K5 are the same on the SV1000. I have got a K3 SV1000 with a hamicad fitted so if you want me to take any pictures/measurements then happy to help. Matt __________________ 2000 - 2004 SV650S 2004 - 2009 SV1000S 2009 - 2013 Triumph Sprint ST1050 2013 - 2016 Triumph Explorer 1200 2016 - Ducati Multistrada DVT S

23-12-06, 11:17 AM	#4
mattSV Member Mega Poster Join Date: Jul 2003 Location: Darn sarf, innit Posts: 2,025	Get you hamicad from http://www.hamicad.co.uk/SV_Fender.html There are others out there, but I have been very happy with my hamicad. Early hamicads had a few problems with the design however they changed them and sent out free replacements to anyone who had problems. Mine has been on for a good couple of years now I think. The good thing about the hamicad is that it retains the stock number plate light - I then made a bracket for the reflector, and cut down the standard plate - see below:- __________________ 2000 - 2004 SV650S 2004 - 2009 SV1000S 2009 - 2013 Triumph Sprint ST1050 2013 - 2016 Triumph Explorer 1200 2016 - Ducati Multistrada DVT S

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Screws for Bar ends/ bar ends, black screen K3 Pointy	renman8957	Stuff Wanted	3	06-02-09 06:08 PM
r&g bar ends	frankie77	Bikes - Talk & Issues	3	20-07-08 02:46 PM
pillion rear ends	palaka46	Bodywork	2	13-05-08 09:08 PM
bar ends	stooster	SV Talk, Tuning & Tweaking	25	25-02-07 08:43 PM
R&G Bar Ends	Cam_73	SV Talk, Tuning & Tweaking	5	06-05-06 01:56 PM

23-12-06, 10:28 AM	#3
Coddy_SV1000Z Guest Posts: n/a	cheers for the reply matey, where did you get your hamicad from? are they the only ones worth bothering with?