Pointy Scottoiler mounting - SV650.org

31-01-07, 01:23 PM

Hi All,

what's the best place to mount a Scottoiler on a K6 pointy?

I've basically given up looking, everytime I think I've found a place I realise it'll be too hot, or it'll bind etc etc.

Any help would be great.

Luckypants · 31-01-07, 02:29 PM

Search is your friend. See this thread http://forums.sv650.org/viewtopic.php?t=50041

31-01-07, 02:32 PM

I've got mine under the rear seat. If you look just to the right of the seat release catch (looking from the rear) you will see a small hole which is un used. I bent the metal bracket which comes with the Scotoiler and bolted it to the spare hole. It sits at near enough 45 degrees. The tubing was then fed down the right hand side of the bike until I got to the tank hinge. I then routed the piping to the left hand side of the bike and made my way to the swingarm. Let me know if a picture or two will help and I'll see if I can take some.

31-01-07, 04:00 PM

Here's a pic:-

31-01-07, 06:50 PM

Mine's under the pillion seat on the left, zip tied to the frame tubing using the supplied big rubber spacer between tubing and bottle.

admin · 31-01-07, 08:56 PM

Mines here. Used a spare bracket that came with the SO and twisted it.

01-02-07, 07:44 AM

Thanks guys, the pics really help

02-02-07, 07:54 AM

Thanks guys, have mounted the device as per Rich_r under the pillion seat (thanks for the photo), how've people chosen to route the oil delivery pipework to the rear? I'm trying for an installation that's as neat as possible.

Cheers.

02-02-07, 09:17 AM

Where in Surrey are you ?

02-02-07, 09:23 AM

Mines in the same place as Rich rs, it stays clean there and you can easily check it

31-01-07, 01:23 PM	#1
tapemonkey Guest Posts: n/a	Pointy Scottoiler mounting Hi All, what's the best place to mount a Scottoiler on a K6 pointy? I've basically given up looking, everytime I think I've found a place I realise it'll be too hot, or it'll bind etc etc. Any help would be great.

31-01-07, 02:29 PM	#2
Luckypants Moderator Mega Poster Join Date: Jul 2003 Location: Nr Ruthin Posts: 7,079	Search is your friend. See this thread http://forums.sv650.org/viewtopic.php?t=50041 __________________ "Your Viffer sounds like it is raising hell! Spot on." - Witchery 17/4/08 Snow Plough Appreciation Society - Member #3

31-01-07, 08:56 PM	#6
admin John T Mega Poster Join Date: May 2003 Location: Shrewsbury, Shrops, UK Posts: 2,524	Mines here. Used a spare bracket that came with the SO and twisted it. __________________ Admin for this forum and the main site. John@sv650.org

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mounting Sat Nav on a Pointy.	danf1234	SV Talk, Tuning & Tweaking	36	27-09-09 08:32 AM
Lower Fairing Mounting Kit - Pointy K6	RichT	Stuff Wanted	8	26-12-08 09:10 PM
curvy scottoiler mounting?	hovis	SV Talk, Tuning & Tweaking	7	20-06-07 01:16 PM
Mounting kit to fit lower fairings to a K4 pointy	Stu	Stuff Wanted	6	06-08-06 11:24 PM
Mounting Scottoiler delivery tubing	walnuts	SV Talk, Tuning & Tweaking	14	13-06-06 09:26 AM

31-01-07, 02:32 PM	#3
FG1 Guest Posts: n/a	I've got mine under the rear seat. If you look just to the right of the seat release catch (looking from the rear) you will see a small hole which is un used. I bent the metal bracket which comes with the Scotoiler and bolted it to the spare hole. It sits at near enough 45 degrees. The tubing was then fed down the right hand side of the bike until I got to the tank hinge. I then routed the piping to the left hand side of the bike and made my way to the swingarm. Let me know if a picture or two will help and I'll see if I can take some.

31-01-07, 06:50 PM	#5
oldjack Guest Posts: n/a	Mine's under the pillion seat on the left, zip tied to the frame tubing using the supplied big rubber spacer between tubing and bottle.

01-02-07, 07:44 AM	#7
tapemonkey Guest Posts: n/a	Thanks guys, the pics really help

02-02-07, 07:54 AM	#8
tapemonkey Guest Posts: n/a	Thanks guys, have mounted the device as per Rich_r under the pillion seat (thanks for the photo), how've people chosen to route the oil delivery pipework to the rear? I'm trying for an installation that's as neat as possible. Cheers.

02-02-07, 09:17 AM	#9
FG1 Guest Posts: n/a	Where in Surrey are you ?

02-02-07, 09:23 AM	#10
rob13 Guest Posts: n/a	Mines in the same place as Rich rs, it stays clean there and you can easily check it