R&Gs ...how to fit? and pillion pegs? - SV650.org

31-08-08, 05:12 PM

Hya guys..

need your help.. yet again!

Got hold of some R&G crash bobbins for the missus SV, but I was looking at them and dont have a clue where they go...

There's a big bolt that I figure out that goes through the engine, but each Bobbin support is a different shape... so I dont know where each go?
also have some metal spacers with rubber around and dont know where they go..
does anyone have instructions for them?

Also, can I ask someone to take pictures of their pillion pegs?
The bike came with an harris exhaust hanger and the pillion pegs in a box, but there's some big spacers in there (about 1") that I cant figure out where they go..

btw.. the bike is an unfaired SK4 650

cheers!!!

31-08-08, 05:23 PM

theres only 2 if the one does not fit, try the other side

TSM · 31-08-08, 05:42 PM

What type of R&Gs have you got. Is it the cup type where the bungs screw into some cups or do you have two metal brackets with two holes in each?, are they U shaped or just flat?

As far as i remember the pegs are a direct flush fit onto the subframe. The spaces may be if there the exhaust system is a highlevel and needs one of the foot pegs to be spaced out.

31-08-08, 06:14 PM

The R&Gs I got are just like these ones...

http://cgi.ebay.co.uk/ws/eBayISAPI.d...MEWA:IT&ih=001

31-08-08, 06:23 PM

im not 100% sure, but i think they are for the fully faired, which will still fit

or remove the brackets and use the long bar

31-08-08, 06:33 PM

http://www.rg-racing.com/Images/Prod.../pdf200_60.pdf

TSM · 31-08-08, 06:37 PM

thoes are the unfaired ones, the faired ones have U shaped brackets

Dave20046 · 31-08-08, 06:57 PM

What are the best bungs for a curvy naked?

31-08-08, 07:00 PM

cheers hovis!

I'm obviously blind as I looked on their website and didnt find it...! lol

TSM · 31-08-08, 07:05 PM

Quote:

Originally Posted by Dave20046

What are the best bungs for a curvy naked?

not R&Gs

ive got these on my SV

http://www.motovationusa.com/mvstore...?idproduct=138

31-08-08, 05:12 PM	#1
[JP] Guest Posts: n/a	R&Gs ...how to fit? and pillion pegs? Hya guys.. need your help.. yet again! Got hold of some R&G crash bobbins for the missus SV, but I was looking at them and dont have a clue where they go... There's a big bolt that I figure out that goes through the engine, but each Bobbin support is a different shape... so I dont know where each go? also have some metal spacers with rubber around and dont know where they go.. does anyone have instructions for them? Also, can I ask someone to take pictures of their pillion pegs? The bike came with an harris exhaust hanger and the pillion pegs in a box, but there's some big spacers in there (about 1") that I cant figure out where they go.. btw.. the bike is an unfaired SK4 650 cheers!!!

31-08-08, 05:23 PM	#2
hovis Guest Posts: n/a	Re: R&Gs ...how to fit? and pillion pegs? theres only 2 if the one does not fit, try the other side

31-08-08, 05:42 PM	#3
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	Re: R&Gs ...how to fit? and pillion pegs? What type of R&Gs have you got. Is it the cup type where the bungs screw into some cups or do you have two metal brackets with two holes in each?, are they U shaped or just flat? As far as i remember the pegs are a direct flush fit onto the subframe. The spaces may be if there the exhaust system is a highlevel and needs one of the foot pegs to be spaced out. __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

31-08-08, 06:14 PM	#4
[JP] Guest Posts: n/a	Re: R&Gs ...how to fit? and pillion pegs? The R&Gs I got are just like these ones... http://cgi.ebay.co.uk/ws/eBayISAPI.d...MEWA:IT&ih=001

31-08-08, 06:23 PM	#5
hovis Guest Posts: n/a	Re: R&Gs ...how to fit? and pillion pegs? im not 100% sure, but i think they are for the fully faired, which will still fit or remove the brackets and use the long bar

31-08-08, 06:33 PM	#6
hovis Guest Posts: n/a	Re: R&Gs ...how to fit? and pillion pegs? http://www.rg-racing.com/Images/Prod.../pdf200_60.pdf

31-08-08, 06:37 PM	#7
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	Re: R&Gs ...how to fit? and pillion pegs? thoes are the unfaired ones, the faired ones have U shaped brackets __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

31-08-08, 06:57 PM	#8
Dave20046 Member Mega Poster Join Date: Jul 2008 Location: Sheffield Posts: 10,274	Re: R&Gs ...how to fit? and pillion pegs? What are the best bungs for a curvy naked? __________________

31-08-08, 07:00 PM	#9
[JP] Guest Posts: n/a	Re: R&Gs ...how to fit? and pillion pegs? cheers hovis! I'm obviously blind as I looked on their website and didnt find it...! lol

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
curvy pillion pegs- full set	Quiff Wichard	For Sale - SV's and SV related items	4	27-05-07 09:56 PM
who enquired about my curvy pillion pegs.	Quiff Wichard	For Sale - SV's and SV related items	3	01-05-07 10:39 PM
Floppy pillion pegs	Muttley	SV Talk, Tuning & Tweaking	8	17-02-06 12:14 AM
Pillion Pegs & Front Wheel	454697819	Stuff Wanted	1	28-12-05 11:55 PM
pillion pegs with high level exhaust	JakeRS	SV Talk, Tuning & Tweaking	8	08-04-05 07:11 PM