Instrument LED's

Dose anyone know what voltage the small led's are on the instrument panel?

Iv been looking on the usual websites, RS, Farnell ect.... and I Have found the LED's however there all rated between 3-5 Volts.

Just wondering if anyone Knows if they are 5v or 12V, I don’t want to risk popping something if the Instrument panel is £150.

Cheers

[ophic]

It's highly unlikely they're 12V LEDs - they won't be wired directly to a 12V source. There should be some resistors in the circuit path to set the voltage to the required level.

And anyway, if you put an LED in with too low a rating, all you'd do is pop the LED itself. Nothing else should be affected. The tricky bit is the soldering.

Look here under "Instrument Bling": http://www.chewys-stuff.co.uk/ if you want a kit with instructions.

Send Adam (Dirtydog) a PM. He sent me a link a while ago to a site that does straight swap LEDs but I can't remember off the top of my head what it was.

[dirtydog]

Originally Posted by joshmac

Send Adam (Dirtydog) a PM. He sent me a link a while ago to a site that does straight swap LEDs but I can't remember off the top of my head what it was.

The OP has a pointy, so he will need the kit from chewys

Ah OK, my mistake. Must've missed that

Cheers Guys, I’ve sorted it now.

I got some Surface mount LED's from RS Components. They are ratted at 3.5v. They come in packs of 10 and are 30 Pence each!

They are a total pig to get off, I could have done with three pairs of hands, but re-fitting them was easy It took about 15 mins to do all eight.

Just tried it today and it looks blue

[ophic]

Originally Posted by aeroshaw

Cheers Guys, I’ve sorted it now.

I got some Surface mount LED's from RS Components. They are ratted at 3.5v. They come in packs of 10 and are 30 Pence each!

They are a total pig to get off, I could have done with three pairs of hands, but re-fitting them was easy It took about 15 mins to do all eight.

Just tried it today and it looks blue

could you supply a link or part number?

This if for the Blue LED's

the link is:

http://uk.rs-online.com/web/search/s...duct&R=6545127

If it dosn't work the part number is: 654-5127

[ophic]

Thanks mate. It's something i've been considering for a while - I might do it at some point in the future. Getting the right parts is half the battle.