SV650.org - SV650 & Gladius 650 Forum



SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000
Need Help: Try Searching before posting

Reply
 
Thread Tools
Old 26-07-07, 08:41 AM   #1
Loser
Guest
 
Posts: n/a
Question Problem shifting from 2nd to 3rd Gear

hi, first of all i have an '05 sv650s with 4500 miles on the clock and i'm the 2nd owner. Since i bought it i have had some problems getting it to upshift to 3rd. Btw I don't do clutchless shifts. However it's not been that big a problem, I'd drop the clutch and still be in 2nd so i would just give it another go. It would always work 2nd time. I should also point out that it only happens sometimes. But this morning i clutched it lifted the gear lever and i could feel it didnt engage so i pushed the lever again and it still wouldnt go into 3rd so then i decided i best drop the clutch as i was beginning to slow-next thing i know the rear wheel has locked up and the back end is fishtailing-luckily i clutched it again and this time it shifted to third but this was a scary moment and sometimes you can be travelling quite quickly before shifting to 3rd so any help or ideas as to what might be the problem would be greatly appreciated
  Reply With Quote
Old 26-07-07, 02:46 PM   #2
Redfox
Guest
 
Posts: n/a
Default Re: Problem shifting from 2nd to 3rd Gear

I'd love to know also...have been having the same problem but with shifting from 1st to 2nd. Bit unnerving what with all the rocket-launch 'get aways' I like to do!
  Reply With Quote
Old 26-07-07, 02:51 PM   #3
Blue_SV650S
Guest
 
Posts: n/a
Default Re: Problem shifting from 2nd to 3rd Gear

Check the oil level, chain tension and finally grease up the gear leaver pivot.

After all those boxes are ticked, see if there is an improvement. Report back and take it from there …
  Reply With Quote
Old 26-07-07, 03:19 PM   #4
Redfox
Guest
 
Posts: n/a
Default Re: Problem shifting from 2nd to 3rd Gear

Am on it...will feedback when done! Ta
  Reply With Quote
Old 26-07-07, 03:47 PM   #5
fizzwheel
Super Moderator
Mega Poster
 
fizzwheel's Avatar
 
Join Date: Dec 2003
Location: Somerset
Posts: 3,614
Default Re: Problem shifting from 2nd to 3rd Gear

Might be worth checking the clutch is adjused properly to.

The other thing I found was that a tiny little bit of upwards pressure on the lever before you go to change helps as well.
__________________
Look Dave, I can see you're really upset about this. I honestly think you ought to sit down calmly, take a stress pill, and think things over.

K5 GSXR 750 Anniversary Edition
fizzwheel is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Gear Shift Rod bent - Gear Changing problem Thaleshwar SV Talk, Tuning & Tweaking 13 05-06-10 06:28 PM
Gear change problem-can't get past 2nd gear muzikill SV Talk, Tuning & Tweaking 8 14-03-10 10:10 PM
Gear change problem-can't get past 2nd gear muzikill SV Ecosse 8 13-09-07 07:45 PM


All times are GMT. The time now is 09:31 AM.


Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.