SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
|
Thread Tools |
03-10-07, 06:51 PM | #1 |
Guest
Posts: n/a
|
Help please
As above i was riding home from work last night went over a small bump and it died i have an sv 650s 2000 curvie any ideas cant see any wires of any where
|
03-10-07, 07:12 PM | #2 |
Member
Mega Poster
Join Date: Jan 2005
Location: Barnet Herts
Posts: 5,068
|
Re: Help please
Have you checked the cut out switch on the left handlebar?It is possible to nudge that when you hit a bump and wonder why it has died.
__________________
On a clear day we stand there and look further than the ordinary eye can see. |
03-10-07, 07:51 PM | #3 |
Captain Awesome
Mega Poster
Join Date: Jan 2007
Location: Hamble
Posts: 4,266
|
Re: Help please
kill switch is on the right handlebar no?
might have bounced the sidestand off the sidestand cutout switch and caused the engine to cut out, as if you'd tried to put the stand down with the bike in gear...
__________________
Official "Dumbass of the Year" 2011 (•_•) ( •_•)>⌐■-■ (⌐■_■) Deal with it... |
03-10-07, 07:55 PM | #4 |
Member
Mega Poster
Join Date: Jan 2005
Location: Barnet Herts
Posts: 5,068
|
Re: Help please
Mines an import,so its LHD.
__________________
On a clear day we stand there and look further than the ordinary eye can see. |
03-10-07, 08:02 PM | #5 |
Guest
Posts: n/a
|
Re: Help please
I have got it going now but instead of trying one thing at a time to see what it is iv pulled and pushed every wire i can see so its running but i still dont no what the problem is
|
03-10-07, 08:10 PM | #6 |
Guest
Posts: n/a
|
Re: Help please
clutch or sidestand switch
|
03-10-07, 08:21 PM | #7 |
Guest
Posts: n/a
|
Re: Help please
[quote=hovis;1304699]clutch or sidestand switch[/quote
yes im thinking the same thing run out of light now thou will try tommorow |
03-10-07, 08:36 PM | #8 |
Guest
Posts: n/a
|
Re: Help please
|
03-10-07, 09:41 PM | #9 | |
Member
Mega Poster
Join Date: Apr 2005
Location: Sunny Swindon
Posts: 3,570
|
Re: Help please
Quote:
It is very possible the side stand switch is the culprit. If its loose on the pivot bolt or it has landed on its side the stand will move about and cut the engine while going over bumps. The switch can be by passed either by bridging the wires or as I have done, cable tie the switch up. |
|
04-10-07, 06:54 PM | #10 | |
Guest
Posts: n/a
|
Re: Help please
Quote:
|
|
|
|