Old 650 head gasket wanted

Hi all, looking for an old head gasket for a 650 99-02 model curvy please. need one for a template to get one made up for my 400. will pay postage. many thanks, Lauren

[Nobbylad]

You could always order one from your dealer, take the template off it, then return it unused for a full refund?

Cant you just lay the gasket paper on top of the head and score the edges to make an impression, or use ink? Ive done that before on a different bike.

I'll probably have on in the garage, where do I post it to?

Yes deffo got one

HI Thanks I am trying to get them made by a company and they want to see if the center of bore is the same for 650 and 400 Thanks suzuki_lady7

cheaper from the use (a lot cheaper) the two OEM ones i got were the price of one from the uk

[squirrel_hunter]

It would appear that they are the same.

I thought I'd give it a little google and I've found a site listing the SV400 parts fiche. My Russian isn't the best but part numbers should be the same across boarders.

The head gasket is, if its the one I think you're after and using the rear as an example; 11242-19F00 according to this site. Compare that to the SV650 and they are identical, this I deduce that they are one and the same part across engine size.

For reference the SV400 fiche and another SV400 model I do not know the difference. I crossed referenced the part number using Ron Ayers and the reverse part look up. Please double check my workings for your own satisfaction.

^ there you go

Hi thanks for your effort i have got a sv400 parts manual and thats is the part no 11141-19f00 and the 650 is 11141-20f00 so its bore 400 is 72mm and 650 is 81mm so looks like the only differance is the cyl hole on the gasket trhanks again guys for the help i have tried cooks fowlers but no joy and my local suzuki dealer said thats the trouble buying an import big help hey Lauren suzuki_lady7