torque wrenches - Page 2 - SV650.org

24-11-05, 10:35 AM

Quote:

Originally Posted by Saint Matt

Quote:

Originally Posted by Drunk Mike

you're not often going to need above 100NM.

Car wheels need them, I'd say that was pretty common.

'checks for the car wheels hiding on his SV'
Nope, not sure what's wrong with your bike, then. As far as I can remember, the pointy SV wheels are 100NM and that's the highest you'll usually need.
Front sprocket is 140NM but that's not often done.

24-11-05, 06:39 PM

ive got the halfords one's but you need the set(3) to cover all the nm.

24-11-05, 07:17 PM

I've got the small Halfords one . . .

. . . and a biggie for adjusting the rear wheels (110nm IIRC

) from the bike show at Ally Palace, which is usually held in January - there was a stall there with loads of cheap tools - they looked OK to me, and haven't let me down so far (mind you I haven't had cause to use them for the last 6 months

)

24-11-05, 09:27 PM

thanks for the info guys but i am still undecided about which one to get i want a half decent one

________
Vedette

24-11-05, 09:59 PM

em would this torque wrench be any good http://cgi.ebay.co.uk/3-8-Torque-Wre...QQcmdZViewItem hope this link works
________
Pornstars Raylene

24-11-05, 09:27 PM	#14
russg Guest Posts: n/a	thanks for the info guys but i am still undecided about which one to get i want a half decent one ________ Vedette Last edited by russg; 19-03-11 at 06:54 PM.

24-11-05, 09:59 PM	#15
russg Guest Posts: n/a	em would this torque wrench be any good http://cgi.ebay.co.uk/3-8-Torque-Wre...QQcmdZViewItem hope this link works ________ Pornstars Raylene Last edited by russg; 19-03-11 at 06:55 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anyone got Draper torque wrenches and are they ok for occasional use?	monkey	Bikes - Talk & Issues	8	10-03-08 05:21 PM
which torque arm	dizzyblonde	SV Talk, Tuning & Tweaking	11	25-01-08 01:38 PM
Tension Wrenches	Kinvig	Bikes - Talk & Issues	15	24-01-08 04:58 PM
low end torque + up top h/p	florida650	SV Talk, Tuning & Tweaking	4	30-07-07 08:59 AM
what does torque mean!?!?!?	didge	SV Talk, Tuning & Tweaking	63	04-07-05 07:49 PM

24-11-05, 06:39 PM	#12
kwak zzr Guest Posts: n/a	ive got the halfords one's but you need the set(3) to cover all the nm.

24-11-05, 07:17 PM	#13
Mr Toad Guest Posts: n/a	I've got the small Halfords one . . . . . . and a biggie for adjusting the rear wheels (110nm IIRC ) from the bike show at Ally Palace, which is usually held in January - there was a stall there with loads of cheap tools - they looked OK to me, and haven't let me down so far (mind you I haven't had cause to use them for the last 6 months )