Engine split advice - what special tools? - SV650.org

muzikill · 11-07-10, 02:49 PM

As it says - also would i be better taking the clutch and rotor off first before dropping the engine?

rictus01 · 11-07-10, 02:58 PM

I'll presume it's an SV (as you don't say), apart from a castled socket (for the mounts) and a rotor puller, and standard tool kit will do (no not the one on the bike) and I'd add a rubber mallet as well.

Cheers Mark.

squirrel_hunter · 11-07-10, 09:07 PM

I removed these parts once the engine was out of the frame.

The alternator rotor tool is best described over here.

The only other thing I would recommend is to make sure the engine externally is cleaned before disassembly starts.

11-07-10, 02:49 PM	#1
muzikill Member Mega Poster Join Date: Jul 2005 Location: Dunfermline Posts: 1,712	Engine split advice - what special tools? As it says - also would i be better taking the clutch and rotor off first before dropping the engine? __________________ Learn to maintain your bike, take it apart, rebuild the engine & more (using better bolts ), drop it & fix it again! K3 Job c.v: Engine:remove/split/rebuild/refit. Replace:Gearbox,Fuel pump,Gaskets. Piston clean,rings. Overhaul:Throttle body,Injectors,Brakes,Forks. Remove/refit:Exhaust,Radiator,Oil cooler,Throttle,Air filter,Tank. Replace: Oil,Coolant,grease,brake hoses & bleed.

11-07-10, 02:58 PM	#2
rictus01 Member Mega Poster Join Date: Jul 2003 Location: South London Posts: 9,799	Re: Engine split advice - what special tools? I'll presume it's an SV (as you don't say), apart from a castled socket (for the mounts) and a rotor puller, and standard tool kit will do (no not the one on the bike) and I'd add a rubber mallet as well. Cheers Mark. __________________ Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming, 'Wow! What a Ride!

11-07-10, 09:07 PM	#3
squirrel_hunter Member Mega Poster Join Date: Apr 2005 Location: Sunny Swindon Posts: 3,579	Re: Engine split advice - what special tools? I removed these parts once the engine was out of the frame. The alternator rotor tool is best described over here. The only other thing I would recommend is to make sure the engine externally is cleaned before disassembly starts. __________________ "A little enthusiastic?" May I add here, GG is awesome and I think I am in love with Stretchie...he rocks my world! SH2 \| 2MA \| GROM \| YSR

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Crash.NET - 125: Haojue split with engine designer Jan Witteveen.	NewsBot	News	0	01-06-09 02:50 PM
taking the engine apart - any special tools required?	charlie13	SV Talk, Tuning & Tweaking	18	31-07-08 09:02 PM
Suzuki special tools	flymo	Stuff Wanted	9	28-02-08 08:30 PM
Advice on a tyre split?	Law	Tyres	14	17-09-07 02:42 PM
any special tools needed for clutch investigation work?	grecian9	SV Talk, Tuning & Tweaking	3	22-09-06 03:04 PM